Votes - 4, Average rating: 4
(
)
)
|
Photos and specs Samsung SC8571 |
manual abstract
To check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube. PIPE Features may vary according to model. Ў Remove waste matter completely if the inlet is blocked. Adjust the inlet lever according to the floor surface. OPTION ^ Carpet Cleaning ¦ Floor Cleaning ^ ^ 4 5 For improved pickup of pet hair and fibre on carpets OPTION 1 2 3 4 Remove dust inside the brush housing using a dry duster or crevice tool. 5 Insert brushbar into rotating belt and assemble. 6 Click the transparent screen cover back into place to reassemble. Push the Open button of the transparent screen cover to separate the cover. Remove the brushbar from the transparent screen. Remove waste matter such as dust and hair tangled around the brushbar using scissors. Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. Vacuum dust in wide area at once OPTION Remove waste matter completely if the inlet is blocked. For picking up pet hair and fibre on upholstery and bed linen. Remove waste matter completely when inlet is blocked. Turn the lock button to ‘UNLOCK’, and remove waste matter. To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the ‘LOCK’ position. Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging. OPTION Clogs on turbine keeps brush from turning, and in this case, take care of it. Brush for blanket 6 Throw away dust in the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. Once dust reaches the dust full mark, or once the filter check light is on, empty the dust bin. Take the dust bin out by pressing the button. Separate the dust bin cover. 1 2 3 4 5 6 CLICK 3EMPTYING THE DUST BIN NOTE You may rinse the dust bin with cold water - Empty into a plastic bag (recommended for asthma/allergy sufferers) 4CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK -If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. Turn the vacuum power to 'MAX' HANDLE CONTROL If the filter check indicator turns red with the inlet floating 10 cm above flat floor, clean it. When the indicator light comes on, please empty the Dust Pack(4-2) as shown in the following illustrations. 7 8 4-2 CLEANING THE DUST PACK 1 2 4 7 8 NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. Remove the dust bin and dust pack as shown. Remove the fixed frame of the dust pack cover. Remove the sponge pad from the dust pack. Wash the sponge and the filter of the dust pack with water. Let the sponge and dust pack dry in the shade for more than 12 hours. Before reassembly, align the dust pack cover and dust pack correctly. Put the assembled dust pack into the main body. Put the sponge into the dust pack. 5 6 3 9 6CLEANING THE OUTLET FILTER CLICK CLICK CLICK CLICK Take out both the dust bin and the dust pack. Lift the handle. Hold the handle of the outlet filter and lift to remove. Remove the fixed frame of the outlet filter cover. Before reassembly, align the outlet filter cover and the outlet filter correctly, and push the outlet filter until you hear a click sound. Dust off the outlet filter by gently tapping. Push the outlet filter into the main body until you hear a click sound. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. 5CLEANING THE MOTOR PROTECTION FILTER 7CHANGE THE BATTERY(OPTIONAL) NOTE 1. When the vacuum cleaner does not work, replace the batteries. If the problem persists, please contact our authorized dealer. 2. Use 2 batteries of size AA. BATTERY TYPE : AA Size WARNING 1. Never disassemble or recharge the batteries. 2. Never heat up the batteries or throw them into fire. 3. Do not reverse (+),(-) poles. 4. Dispose of the batteries properly. - IF YOU HAVE A PROBLEM PROBLEM CAUSE REMEDY 0 Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is gradually decreasing. Nozzle, suction hose or tube is blocked. Check for blockage and remove it. Cord does not rewind fully. Check that the cord is not twisted or wound unevenly. Pull the cord out 2-3m and push the cord rewind button. Vacuum cleaner does not pick up dirt. Crack or hole in hose. Check hose and replace if required. Low or decreasing suction Filter is full of dust. Please check filter and, if necessary, clean as illustrated in the instructions. This Vacuum cleaner is approved the following. EMC Directive : 89/336/EEC, 92/31/EEC and 93/68/EEC Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC If you have any comments or questions regarding a Samsung products, contact the SAMSUNG customer care cente...
Other models in this manual:Vacuum Cleaners - SC8551 (2.24 mb)