Votes - 1, Average rating: 5 ( )

Manafacture: Samsung File size: 6.69 mb File name: Language of manual:

Remove waste matter completely if the Adjust the inlet lever according to the inlet is blocked. floor surface. OPTION ....Carpet Cleaning ....Floor Cleaning Vacuum dust in wide area at once OPTION Remove waste matter completely if the inlet is blocked. For picking up pet hair and fibre on upholstery and bed linen. Remove waste matter completely when inlet is blocked. Turn the lock button to ‘UNLOCK’, and remove waste matter. Turbine Brush To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the ‘LOCK’ position. Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging. OPTION Clogs on turbine keeps brush from turning, and in this case, take care of it. Brush for blanket EN-5 Once dust reaches the dust full mark, or once the dust full light is on, empty the dust bin. Take the dust bin out by pressing the button. Separate the dust bin cover. Throw away dust in the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. 1 2 3 4 5 CLICK 6 3EMPTYING THE DUST BIN NOTE You may rinse the dust bin with cold water - Empty into a plastic bag (recommended for asthma/allergy sufferers) EN-6 4CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK -If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. HANDLE CONTROL SENDER Turn the vacuum power to 'MAX' If the filter check indicator turns red with the inlet floating 10 cm above flat floor, clean it. When the indicator light comes on, please empty the Dust Pack(4-2) as shown in the following illustrations. EN-7 4-2 CLEANING THE DUST PACK 1 2 3 Remove the dust bin and dust Remove the sponge and filter Remove the fixed frame pack as shown. from the dust pack. of the dust pack cover. 4 5 6 Wash the sponge and the filter Let the sponge and filter dry in Put the sponge and filter of the dust pack with water. the shade for more than into the dust pack. 7 8 12 hours. Before reassembly, Put the assembled dust pack align the dust pack cover into the main body. and dust pack correctly. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. EN-8 6CLEANING THE OUTLET FILTER NOTE : Replacement filters are available at your local Samsung distributor. Remove and replace the blocked outlet filter. OPTION - MICRO CARBON FILTER Take out both the dust bin and the dust pack. Press the fixed frame part at the back of the main body to remove. Pull out the HEPA Filter using the tab. Dust the HEPA filter. Put the HEPA filter into the main body until you hear a ‘click’ sound. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. 5CLEANING THE MOTOR PROTECTION FILTER EN-9 7CHANGE THE BATTERY(OPTIONAL) NOTE 1. When the vacuum cleaner does not work, replace the batteries. If the ...

Download now

Please, enter two numbers from picture: