Votes - 2, Average rating: 5
(
)
)
|
manual abstract
Register your product at IMPORTANT SAFEGUARDS This appliance must be connected to the same main voltage as shown on the rating plate. This vacuum cleaner is not suitable for removing any kind of liquid. Carpets treated with a liquid cleaner must be allowed to dry before being cleaned with the unit. Never operate the vacuum cleaner without a dust bag. The cover cannot be closed if a dust bag is inserted. Please do not close forcibly. Keep children away from this vacuum cleaner. It must not be used on people or animals. Never use your appliance to vacuum matches, glowing embers, or cigarette-ends. Avoid vacuuming hard, pointed objects, since they may damage the appliance or dust bag. If your vacuum cleaner has a fault, please contact your electrical ^ ^ ^ ^ ^ ^ ^ ^ ^ retailer or an auth-orized service agent. If the main cable is defective, the complete cable winder must be replaced by a service agent. PROTECTING THE ENVIRONMENT ^ ^ Once you have unpacked the unit, do not simply throw the packing into the household waste. Take them to the appropriate collecting points for recycling. EN-1 EN-2 IDENTIFICATIONS OF PARTS ASSEMBLING THE VACUUM - CLEANER READY FOR USE 1) Connect the suction hose to the suction tube. 2) Connect the suction tubes together (depending on model). 3) Connect the nozzle to the suction tube. 4) Connect the body connector to the body of the cleaner. OPTION : Adjusting the telescopic tube(depending on model). ^ Features marked with * may vary according to model. HANDLE AIR REGULATOR TUBE* FLOOR NOZZLE* RUG/FLOOR SELECTOR BUTTON FOR SUCTION HOSE REMOVAL CLAMPER FOR DUST BAG COMPARTMENT POWER CONTROL SWITCH* ON/OFF BUTTON CORD REWIND BUTTON DUST-FULL INDICATOR SUCTION HOSE CARRYING HANDLE EN-3 POWER CORD ON / OFF SWITCH POWER CONTROL(VARIABLE CONTROL TYPE ONLY ) 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) REWINDING When you have finished cleaning, disconnect the plug from the electrical outlet and simply press the cord rewind button lightly with your toe. With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch with your toe. The vacuuming power can be adjusted to suit any situation with the electrical power control. MIN = For delicate fabrics, e.g.net curtains. MAX = For hard floors and heavily soiled carpets. NOTE : When removing the power cord from the electrical outlet, grasp the plug, not the cord. EN-4 NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged. DUST-FULL INDICATOR USING THE ACCESSORIES USING THE BLOWER If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. • Crevice tool for radiators, crevice, corners, between cushions. Located on the left rear side of the cleaner. 1) Disconnect the hose from the body of the cleaner. 2) Connect the hose clamper to the blow hole. CREVICE DUSTING • Before use, assemble the dusting brush to the crevice tool. • Dusting brush for furniture, shelves, books, etc. EN-5 FOR CLOTH FILTER BAG REPLACING THE DUST BAG 1) To open the dust cover of the dust bagcompartment, press the clamper upward. (The clamper is located at the front of the dust cover) 2) Remove the carrying bag from the cleaner. After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again. 3) After removing the used dust bag, insert the cardboard bag collar of the new dust bag into the carrying bag. 4) Press the dust cover down gently until the clamper relocks. EN-6 MAINTENANCE OR REPLACEMENT OF THE FILTERS 1) INLET-FILTER. • Open the dust cover. • After detaching the filter, wash it lightly withwater, dry it in the shade, and then insert it in its original position. • Close the dust cover. 2) OUTLET-FILTER. • To open the filter cover, press front and pull it simultaneously. • Remove and replace the dirty microfilter. • Close the cover. USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator . when cleaning carpets.. Select flat surface indicator . when cleaning the floors, tiles, etc. OPTION - Detach Transparent drum cover for easy cleaning EN-7 NOTE : For optimum efficiency, clean floor brush with crevice tool. TROUBLE SHOOTING PROBLEM CAUSE REMEDY Motor does not start. No power supply. Check cable, plug and socket. Suction force is gradually Filter, nozzle, suction hose Remove the object. decreasing. or tube is blocked. Cord does not rewind fully. Check that the cord is not Pull the cord out 2~3m & twisted or wound unevenly. push down the cord rewind button. DJ68-00186E REV (0.4) This Vacuum cleaner is approved the following EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC Low Voltage Safety Directive : 73/23/EEC a...