Votes - 3, Average rating: 4 ( )

Manafacture: Billy Goat File size: 2.05 mb File name: Language of manual:

Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS SERIAL PLATE DATA AND SPECIFICATIONS 3 GENERAL SAFETY 4-5 SOUND AND VIBRATION 6 INSTRUCTION LABELS 7 PACKING CHECKLIST & ASSEMBLY 8 OPERATION 9-10 MAINTENANCE 11 TROUBLESHOOTING AND WARRANTY PROCEDURE 12 MAINTENANCE RECORD 13 ILLUSTRATED PARTS & PARTS LISTS 14-15 Part No 890033 Form No F062306A 2 KD Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications KD612 KD512HC KD512HCS Engine: HP 6.0 (4.47 kW) 5.5 (4.11 kW) 5.5 (4.11 kW) Engine: Type B & S QUANTUM HONDA OHC HONDA OHC Engine: Model 112K020124E1 GCV160AN1A GCV160AN1A Engine: Fuel Capacity 1.5 qt. (1.4 L) 1.16 qt. (1.1 L) 1.16 qt. (1.1 L) Engine: Oil Capacity 0.63 qt. (0.6 L) 0.58 qt. (0.6 L) 0.58 qt. (0.6 L) Total Unit Weight: 98# (44.5 kg) 99# (45.0 kg) 99# (45.0 kg) Overall Length 62” (1.57m) 62” (1.57m) 62” (1.57m) Overall Width 26.75” (0.68 m) 26.75” (0.68 m) 26.75” (0.68 m) Overall Height 42” (1.07m) 42” (1.07m) 42” (1.07m) Max. operating slope 200 200 200 Lwa at operator position 111 dBa 111 dBa 111 dBa Lpa at operator position 97 dBa 97dBa 97dBa Vibration at operator position 0.34 g (3.29m/s2) 0.27 g (2.86m/s2) 0.27 g (2.86m/s2) Part No 890033 Form No F062306A 3 KD Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS KD Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equipment. This symbol indicates gloves should be worn when servicing this equipment. This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT ® KD Vacuum. This symbol indicates the engine oil level should be checked before operating this equipment. Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this equipment: READ this manual and the engine manufacturer’s manual carefully before assembling, operating, or servicing this equipment. EAR PROTECTION is recommended when operating this equipment. EYE PROTECTION is recommended when operating this equipment. BREATHING PROTECTION is recommended when operating this equipment. EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a spark arrester is installed on the muffler as required by Section 4442 of the California Public Resources Code. The arrester must be maintained in good working order. Other states may have similar laws. Federal laws apply on federal lands. DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison. Part No 890033 Form No F062306A 4 KD Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated. DO NOT smoke while filling the fuel tank. DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester. DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary. DO NOT operate engine with grass, leaves or other combustible material near the muffler. DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns. DO NOT leave equipment unattended while in operation. DO NOT park equipment on a steep grade or slope. DO NOT operate equipment with bystanders in or near the work area. DO NOT allow children to operate this equipment. DO NOT operate equipment with guards removed. DO NOT operate equipment near hot or burning debris or any toxic or explosive materials. DO NOT operate equipment on slopes greater than specified in Specifications section of this manual. DO NOT place hands or feet underneath unit, or near any moving parts. ALWAYS remove spark plug wire when servicing...

Download now

Please, enter two numbers from picture: