Votes - 3, Average rating: 4.3
(
)
)
|
manual abstract
(23) - If you stretch the elbow tube, it is returned to its position. Using the cleaning head and Accessory Nozzles Fit the large cleaning head onto the end of the tube. • The 2 position head (6) is equipped with a pedal (7) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquet floors...). slide on the lever to lower the brush. Carpet or rug position. slide on the lever to lift brush up. • Easy &Powerful celaning through adjusting the air-control lever. (21) : use for hard floor & short type. : carpet use for long type carpet. • Crevice Tool (8) For vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down the side of a sofa! • Upholstery Nozzle (9) For vacuuming upholstery, mattresses, etc. The thread collectors help to pick up the threads and fluff. • Dusting brush (10) For vacuuming picture frames furniture outlines, books and other uneven objects. - 4 - Ie How to plug in and use Pull out the mains lead to the desired length and plug into the socket. Adjusting the power level • Electronic power control(11) OFF:Power off MAX:Full power. AUTO: Suction capacity will change automatically according to the quantity of surface dust. String the cleaner When you have switched off and unplugged the appliance, press on the button (19) to automatically rewind the cord.(depending on model) • Use storage clip as shown when storing the cleaner (12) Changing the dust bag The dustbag needs changing when the cleaner is set to maximum power and the cleaner head is off the floor but the “bag full” indicator window (13) is completely coloured red. Even if the dustbag does not appear to be full at this stage, it should be changed. It could be that a great deal of very fine dust has clogged up the pores of the dust bag. • Turn off the appliance and unplug it. • Remove hose. • Open the cover (14) Your appliance is equipped with either a paper dust bag or a fabric dust bag. • Push the lever forwards in the direction of the arrow (16), and pull off the full paper filter bag towards the rear. Remove the bag and throw it away. • Insert the new paper filter bag into the unit with the arrow pointing downwards (17) If your appliance is fitted with a fabric dust bag follow the same instructions as above (15) Note: as the appliance is fitted with a safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted correctly. Cleaning the motor filter The motor filter is situated inside the appliance between the dust bag and the motor. Each time that you change the air outlet filter we advise you to remove the motor filter (18) and to clean it by tapping to remove the dirt and then replacing it in the vacuum cleaner. Changing the air outlet filters • To change these filters remove the cover of the filter compartment (20) situated at the rear of the appliance. • The washable HEPA filter it with water at least once a year. ■ The working life of this set is 7 years since the date of delivery to the consumer. Upon the expiry of the said period, it might be unsuitable for the use according to their destination. What to do if your appliance does not work Check that the appliance is correctly plugged in and that the electrical socket is working. What to do when the suction performance reduces? • Stop the appli...
Other models in this manual:Vacuum Cleaners - V-C586*C** (1.5 mb)