Votes - 3, Average rating: 4.3 ( )

Manafacture: LG File size: 3.82 mb File name: Language of manual:

Photos and specs  LG  V-C3G51NTU

Press on the pedal to lower the brush. Carpet or rug position. Press on the pedal to lift the brush up. * Crevice Tool(9) For vacuuming in those normally inaccessible places i.e. reaching cobwebs, or down the side of a sofa! How to plug in and use Pull out the supply cord to the desired length and plug into the socket. Press button (14) to start the vacuum cleaner. To stop it press the button (14) again. Adjusting the power level * If your appliance is equipped with an electronic variable power control(13), you can choose the power appropriated for the task. The more you slide the button towards the right, the greater the suction power. * The flexible hose handle(15) has a manual air flow regulator(16) which allows you to briefly reduce the suction level. Storage(17) When you have switched off and unplugged the appliance, press on the button (12) to automatically rewind the cord. You can move or store your appliance in a vertical position by sliding the hook on the large cleaning head Into the clip on the underside of the appliance. 4 Ie Changing the dust bag The dustbag needs changing when the cleaner is set to maximum power and the cleaner head is off the floor but the “bag full” indicator window(18) is completely coloured red. Even if the dustbag does not appear to be full at this stage, it should be changed. It could be that a great deal of very fine dust has clogged up the pores of the dust bag. • Turn off the appliance and unplug it. • Open the cover by pressing the hook(19) and lifting It up until it snaps into place. Your appliance is equipped with either a paper dust bag (20) or a fabric dust bag (22)(depending on model). • Take hold of the dust bag by the handle and pull.Remove the bag and throw it away. • To refit a new bag push the cardboard support of a new bag into the bag mount (21)until it will go no further. If your appliance is fitted with a fabric dust bag follow the same instructions as above. Empty it and replace it(22). Note: as the appliance is fitted with a safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted correctly. Cleaning the motor filter The motor filter is situated inside the appliance between the filter supporter (23) and the motor. Each time that you change the air outlet filter we advise you to pull the handle on the filter supporter, remove the motor filter (24) and to clean it by tapping to remover the dirt and then replacing it in the vacuum cleaner. Cleaning the exhaust filter (25) * Check the exhaust filter occasion-ally and clean when dirty. * Unplug cord from outlet. * Open the exhaust cover (26) and remove exhaust filter as shown. * Next procedures are the same as the moter safety filter. * Turbine brush nozzle (27). ■Easy & Powerful cleaning through adjusting the air-control lever (28). (C^ ) ^ : use for hard floor & short type carpet. (TOO : use for long type carpet. * Cleaning turbine brush nozzle (29) Press the button on the rear side of the nozzle to separate the air cover. Use the dusting brush & crevice tool to vacuum clean the brush and fan. What to do if your appliance does not work? Check that the appliance is correctly plugged in and that the electrical socket is working. What to do when the suction performance reduces? ■ S...

Download now

Please, enter two numbers from picture: