Votes - 1, Average rating: 5 ( )

Manafacture: AEG File size: 375.72 kb File name: 272200en.pdf Language of manual:

There is no need to manually adjust the cleaner head to suit different floor types. Four rollers, as well as 2 wheels at the back of the cleaner head, give the VARIO 4000 extremely good manoeuvrability. Even sideways movements are possible. The rollers ensure a constant distance between the floor and the underside of the cleaner head. This allows even scratch prone wooden flooring to be cleaned. It additionally features a pivot that makes your hand vacuum cleaner especially mobile. Working under furniture is eased by lateral rotation of the appliance. Fig. 12: When the nozzle Is inserted with rotation through 180°, the VAMPYRETTE needs a working height of only 19 cm. What to do when the rollers and wheels start seizing up? (fig. 13) Remove the hair or threads that have accumulated around the rollers, wheels and axles of the cleaner head. 11 The rollers and wheels are easily removed for cleaning. The wheels (A) are removed by pulling in a sideways direction as illustrated. Remove the hairs and threads and push the wheels back into place until you hear an audible click. The 4 rollers (B) can be levered out of their location by using an thin flat object such as a screwdriver or spoon (please observe the arrow direction). Insert the screwdriver (B) as illustrated and lever out the roller. Remove the hairs and threads and push the roller back into place. BEWARE: Place the flat of the hand over the roller whilst levering out. This avoids the roller springing out. For the sake of the environment Do not throw away packing material. • The cardboard box can be taken to paper recycling facilities. • Plastic bag made of polyethylene (PE) can be taken to recycling facilities of PE collection depots. • The filler parts are made of polystyrene (PS). They do not contain any CFCs. Your local Department for the Environment will be able to give you advise as to where collecting depots and recycling facilities are available. Changing the thread collectors (fig. 14) If the thread collector (C) on the cleaner head (located near the pipe exit) is worn out then it can be replaced. This is available from AEG Spare Parts Department under part number ET-nr. 668 901 690. ROTOSOFT1100 turbobrush (fig. 15) (Special accessory, E-No. 618104 200) The ROTOSOFT 1100 turbobrush eases the care of carpets and hard floors. Its rotating brush picks up trodden-in dirt, e.g. in well-trodden areas, and straightens the carpet pile. The ROTOSOFT 1100 turbobrush can also be used on hard floors without re-equipment. ROTOSOFT electrosuction brush (fig. 16) (Special accessory, E-No. 618 110 211) This is the ideal accessory for cleaning large areas of carpeting quickly and thoroughly. Fluff and threads are no problem for this appliance, which will gently brush and vacuum your carpet in a single operation. The device is fitted to the socket outlet of your hand vacuum cleaner. When working with ROTOSOFT, do not run over the vacuum cleaner flex! 12 AEG Kundendienst in Europa 52068 Aachen, Auf der Hüls 197 63741 Aschaffenburg, Dammer Straße 5 14199 Berlin, Hohenzollerndamm 150 33609 Bielefeld, Schillerstraße 44 53113 Bonn, Friedrich-Ebert-Allee 26 71034 Böblingen-Hulb, Dornierstraße 7 38102 Braunschweig, Campestraße 7 28207 Bremen, Hastedter Osterdeich 222 41541 Dormagen-St. Peter, Sachtlebenstraße 1 44139 Dortmund, Rheinlanddamm, AEG Haus 01099 Dresden, Industriegelände, Straße E Düsseldorf (Kundendienst in 41541 Dormagen) 99096 Erfurt, A...

Download now

Please, enter two numbers from picture: