Votes - 1, Average rating: 4 ( )

Manafacture: AEG File size: 523.63 kb File name: Language of manual:

Use the floor nozzle for loose rugs and the upholstery nozzle for curtains, cushions etc. Confined areas: Use the crevice nozzle for crevices, corners and radiators. Hard floor / parquetry: use the hard floor nozzle to avoid scratching (7460, 7480, 7481, 7485, 7486, 1800 TRIO). For the perfect care of your carpets: use the turbo nozzle. The rotary motion of its brush gently loosens short-pile carpets where the dirt has been trodden in. It removes stubborn fluff and pet hairs (7480, 7481, 7485, 7486, 1800 TRIO). a Removing the contents of the dust container (see page 5) Never operate the cleaner without the dust container installed. The dust container must be emptied if the window of the dust container indicator changes its colour into red when the cleaner is operating at maximum power and the nozzle is raised from the floor. Remove the dust container from the cleaner by pushing the opening button on both sides. Remove the contents of the dust container by pushing the orange-coloured opening button. Close the dust container lid until it clicks. Put the dust container back into the cleaner. Cleaning the filters (see page 5) Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaner with filters installed to avoid reduced suction and the damage of the motor. Always operate the cleaner with the cartridge filter installed. Disconnect from electrical outlet before changing the filters. Cleaning the cartridge filter: Remove the dust container from the cleaner by pushing the opening button on both sides. Rotate the dust container cover counter-clockwise (A) and pull it out from the dust container (B). 10 Remove the cartridge filter by turning it counter-clockwise (A) and pull it out from the dust container cover (B). I®” Remove the cartridge filter from the cartridge filter plate by turning it counter-clockwise. Remove the protector mesh by pulling it out. Shake the dirt from the filter and the mesh into a bin. If necessary, the filter and mesh can be rinsed, with cold water, under a tap . HSf* Air dry them for approximately 24 hours, to ensure it is completely dry before re-using. Avoid direct sunlight and extreme drying circumstances (hair-dryer, etc.). If you wish to use your appliance while the cartridge filter is drying, you may use the extra cartridge filter inserted in the packaging box (7440, 7460, 7480, 7485). IES3 Insert the protector mesh back into its place by pulling it onto the cartridge filter. ICS3 Insert the cartridge filter back into the cartridge filter plate by turning it clockwise. PS3 Insert the cartridge filter back into the dust container cover (B) and turn it clockwise (A). I®” Insert the dust container cover back into the dust container (B) and turn it clockwise (A). Put the dust container back into the cleaner. Cartridge filter reference number: 407 135 654/9. Cleaning the exhaust filter: IES3 Open the filter grill to remove the exhaust filter. US3 Take the filter out of the grill and insert a new one. ICS3 Close the filter grill. Exhaust filter reference number: Menalux D09. Troubleshooting • Power: If the electric power does not come on, disconnect from mains and check plugs, cable and fuses where appropriate. • Blockages/dirty filters: The cleaner may switch itself off in the event of a severe blockage or excessively dirty filter(s). In such cases, disconnect from mains and allow to cool for 20-30 minutes.Clear blockage and/or replace filter(s) and restart. The clearing of blocked hoses is not covered by the guarantee. Please also see AEG-Electrolux additional information in the separate AEG-Electrolux Warranty Booklet. • Water: If wate...

Download now

Please, enter two numbers from picture: