Votes - 3, Average rating: 4
(
)
)
|
manual abstract
21. Extreme caution should be exercised when using this appliance to clean stairs. 22. Never use steam mop without micro-fiber cleaning pad attached. 23. Keep your work area well lit. 24. Store steam mop indoors in a cool, dry place. 25. To avoid circuit overload, do not operate another appliance on the same socket (circuit) as the steam cleaner. 26. If an extension cord is absolutely necessary, an extension cord rated a minimum of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may overheat. Care should be taken to arrange cord so that it cannot be pulled or tripped over. 27 Always unplug and allow the steam mop to cool before removing or changing mop heads. WARNING: Your steam mop is designed to clean hard floor surfaces that will withstand high heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We also recommend that you check the use and care instructions from the floor manufacturer. This manual covers model number: S3601 11 TECHNICAL SPECIFICATIONS Voltage: 120V., 60Hz. Power: 1550 Watts Water Capacity: 500ml (16.9 oz.) English Contents Thank you for purchasing the Shark® Pro Steam Pocket® Mop. Getting Started......................................................................2 Using Your Steam Mop .......................................................5 Using Your Carpet Glider ...................................................9 Care of Your Steam Mop ....................................................10 Troubleshooting Guide .......................................................12 Warranty...................................................................................13 Getting Started When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark® Pro Steam Pocket® Mop. b a c e f d g a Steam Mop Body b Mop Handle c All-Purpose Mop Head (1) and Triangle Mop Head (1) d Filling Flask e Two-Sided Micro-Fiber Cleaning Pads for the All-Purpose Mop Head (2) and Triangle Mop Head (1) f (1) 6mm x 54mm Large Screw* g Carpet Glider *Phillips or flat head screwdriver can be used. Screwdriver not included. h i k l m j h Quick Release Swivel Cord Wrap i Cord Clips j Water Tank Cap k Water Tank l ON/Standby Switch m Mop Head Release Button English fig. 1 IMPORTANT: First things first, always make sure the mop is UNPLUGGED from the wall when not in use. Never fill the mop, attach the mop head, change or remove the micro- fiber cleaning pad when the mop is plugged into the wall. To prolong the life of your Shark® Pro Steam Pocket® Mop, we recommend using distilled water. Make sure you only add water to the tank. Chemicals or cleaning solution may damage the appliance and could be unsafe for you and your family. ASSEMBLE 1 Insert the Mop handle end labeled “Front” into the steam mop body. Make sure it is inserted past the line printed on the pole. Secure the assembled handle and pole by using the large screw and a Phillips or a flat head screwdriver (screwdriver not included). (fig. 1) Getting Started - cont’d fig. 2 fig. 3 fig. 4 fig. 5 2 Use the lavender loop on the side of the micro-fiber cleaning pad to slide mop head into pad pocket. Then secure the quick fasteners on the top of the pocket to lock in place. (fig. 2) 3 Snap the mop head into the base to secure it. (fig. 3) 4 Turn the water tank cap counter clockwise and remove from the tank. (fig. 4) Use the filling flask and pour water into the tank. Please don’t overfill. Replace the cap on the water tank. (fig. 5) IMPORTANT: Don’t use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We recommend that you check the use and care instructions from the floor manufacturer. Using Your Steam Mop IMPORTANT: Make sure you don’t use the mop without attaching a micro-fiber cleaning pad and adding water to the tank first. When you are using the mop for the first time, it might take longer than the normal 30 seconds to start steaming. fig. 6 IMPORTANT: Your Steam Mop needs water to make steam! Never use your steam mop without water in the tank. Sweep or vacuum your floors prior to cleaning with your Steam Mop. Visit for other great quick cleaning products to complement your Steam Mop, such as the Shark® Navigator (model NV350). English fig. 7 1 Pull and twist the quick release cord holder to unwrap the power cord completely. Plug into a 120-volt electrical outlet. (fig. 6) 2 The ON/STANDBY switch will flash blue...