Login:
Sorted: Name ↑   Downloads   Rate   Size ↑  
downloaded: 4   File size: 2 mb   Manafacture: AMX  
Category: Remote Control
@name

The Mio R-3 is pre-loaded with firmware that allows joining to ZigBee Pro 2007 networks, but may be upgraded with firmware allowing access to older ZigBee 2004 networks. You need VisualArchitect and KeypadBuilder to properly program this device. The application and documentation are available from Power Transmission Mode Current Menu Battery Meter Custom Macro Buttons Custom Mode Options 14 - Select 15 - Move Right 16 - Guide 18 - Move Down 19 - Volume Up 20 - Last Selected 21 - Channel Up 22 -

downloaded: 0   File size: 2 mb   Manafacture: AMX  
Category: Remote Control
@name

= alphanumeric characters Example: SEND_COMMAND TP,'@SSL-Touch Panel Power On' Sends Touch Panel Power On to the control system when the Touch Panel powers up. '@SWK-' Change the Wakeup string sent to the control system when the Touch Panel is activated. = alphanumeric characters Example: SEND_COMMAND TP,'@SWK-Touch Panel Activated' Sends Touch Panel Activated to the control system. Color Active-Matrix LCD Touch Panels AXCESS Programming 131 Color Send_Commands Use the

downloaded: 67   File size: 1 mb   Manafacture: AMX  
Category: Remote Control
@name

AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. The dimming performance or quality cannot be guaranteed due to the random combinations of dimmers, lamps and ballasts or transformers. • Unless otherwise specified, OEM and custom products are warranted for a period of one (1) year. • AMX Software is warranted for a period of ninety (90) days. • Batteries and incandescent lamps are not covered under the warranty. This warranty extends only

downloaded: 3   File size: 1 mb   Manafacture: AMX  
Category: Remote Control
@name

The R-4 communicates with a NetLinx master via a wireless ZigBee® network: the device comes with installed firmware for connecting to a ZigBee Pro network, but it can be updated with firmware to allow it to connect to older ZigBee networks. Use TPDesign4 (TPD4) to program this device. The R-4 uses a mini-USB port for transferring programming files. Touch Screen FIG. 1 Mio Modero R-4 Remote 1 2 3 4 5 6 7 8 910 19 11 12 1315 14 16 17 18 20 1 - Power 2 - Guide 3 - Exit 4 - Menu 5 - Information 6 -

downloaded: 2   File size: 1 mb   Manafacture: AMX  
Category: Remote Control
@name

If this device is installed in a manner such that the radio module FCC ID. label is not visible on the outside of the end product, a label must be placed on the end product with the following statement: "Contains FCC ID. CWU-NXR-MO" This device complies with Part 15 of the FCC rules. Subject to the following two conditions: 1. This device must not cause harmful interference and 2. This device must accept all interference, including interference that interferes with the operation of this device.

downloaded: 4   File size: 534 kb   Manafacture: AMX  
Category: Remote Control
@name

The two black adhesive-backed window shields (Figure 3) are included within each emitter package and allow for alternate configurations. With this shield (surrounding the internal emitter), you can restrict IR reception through the device’s control window by blocking any interference or IR signals produced by sources other than the internal emitter. Without this shield, any incoming IR signal can pass through to the IR control window and overlap signals sent via the emitter (Figure 1). Note: Eac

downloaded: 1   File size: 504 kb   Manafacture: AMX  
Category: Remote Control
@name

3 Programming The Mio R-1 ..................................................................................5 Using Connector Ports on The Mio R-1..................................................................... 5 IR Code Matrix.......................................................................................................... 6 Configuration Mode ................................................................................................. 7 Setting The IR Frequency................

downloaded: 0   File size: 481 kb   Manafacture: AMX  
Category: Remote Control
@name

8 shows the wallbox mounting dimensions for the single and double style Mio Modero. AMX recommends mounting the Mio Modero in a standard one-gang wallbox, a conduit box per NEC specs section 370, with a minimum internal clearance of 2-5/8" x 1-3/4" x 1-5/8" (HWD), but it is possible to mount the Mio Modero to a podium without a wallbox. 2.250 [57.2 MM] [83.4 MM] 3.282 [50.8 MM] 2.000 FIG. 8 Mio Modero Single Style mounting dimensions 2.250 [57.2 MM] [83.4 MM] 3.282 [50.8 MM] 2.000 FIG. 9 Mio Mod

downloaded: 0   File size: 476 kb   Manafacture: AMX  
Category: Remote Control
@name

AMX EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. EXCEPT AS OTHERWISE LIMITED BY APPLICABLE LAW, AMX RESERVES THE RIGHT TO MODIFY OR DISCONTINUE DESIGNS, SPECIFICATIONS, WARRANTIES, PRICES, AND POLICIES WITHOUT NOTICE. Table of Contents Table of Contents Overview ............................................................................................................1

downloaded: 1   File size: 416 kb   Manafacture: AMX  
Category: Remote Control
@name

REV Z 7 47 87 127 167 207 42 PLAY A 1 41 81 121 161 201 43 S. FWD Y 6 46 86 126 166 206 44 REW E 5 45 85 125 165 205 45 FWD D 4 44 84 124 164 204 Configuration Mode The configuration mode allows you to set the following device features: .. IR Transmit Mode (38 KHz, 455 KHz or both 38 KHz IR and RF) .. Timeout Adjustment .. Download Mode .. Debug Mode .. Battery Type .. LED Awake Brightness .. LED Sleep Brightness To enter configuration Mode: 1. Press and hold the STOP button and the INPUT button





Category