Login:
Votes - 3, Average rating: 4.7 ( )

User manual ATON, model DLA2RM

Manafacture: ATON
File size: 270.02 kb
File name: DLA2-4-6RM_Manual.pdf
Language of manual:enes
Free link for this manual available at the bottom of the page



manual abstract


Please keep the original sales receipt for your records and send a copy to request warranty service. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. * ATON is a division of ELAN Home Systems, LLC. ROOM 1 ROOM 1 ROOM 1 ROOM 2 ROOM 2 ROOM 2 ROOM 3 ROOM 4 ROOM 3 ROOM 4 ROOM 5 ROOM 6 ALL ON ALL ON ALL ON ALL OFF ALL OFF ALL OFF SCENE SCENE SCENE MUTE MUTE MUTE VOL + VOL + VOL + VOL _ VOL _ VOL _ Place included Room labels here ATON PORT PATENT PENDING PWR IN 12VDC / 2.1A AMPLIFIER INPUT IR EMITTER OUTPUTS RF Receiver DLA2/4/6 or DLA2RF RJ-11 Plug Button Function Room 1-6 Selects Rooms for Adjustment All On Turns All Rooms On All Off Turns All Rooms Off Scene Places Rooms into Scene Preset Mode Mute (Toggle) Press to Reduce Volume of Selected Room to 0, Press Again to Increase Volume to Previous Level Vol + Increases Volume of Selected Room by One Step Vol - Decreases Volume of Selected Room by One Step DLA2RM/DLA4RM/DLA6RM RF Remote The DLA2RM, DLA4RM and DLA6RM RF Remotes are accessory remote controls designed to work with ATON models DLA2RKT, DLA4RKT and DLA6RKT RF Remote/Receiver Kits. These remotes will function as additional controllers when added to existing RF Receiver installations or as replacement units. Note: These remotes will not function without an installed RF receiver. RF Remotes Make sure RF receiver is plugged into the DLA ATON Port and that the DLA Selector is powered On (power supply is plugged in). Remove the access cover from the bottom of the RF receiver. Press and release the Program button - Program LED will turn solid. Within 10 seconds press and release the “Scene” button on the remote you wish to program into the receiver. If the remote is programmed into the receiver correctly, the program LED will immediately turn off. Repeat steps 3-5 for additional remotes (up to seven remotes can be programmed into one receiver). NOTE: Only ONE RF receiver can be used per DLA Selector. Program all additional remotes into the original RF receiver. The remote that is included with the original RF Remote/Receiver Kit is pre-programmed to the receiver and will function without additional programming. Programming the RF Remote to function with the RF Receiver 1 2 3 4 5 6 D4 S1 JP1 JP2 JP3 JP4 D4 S1 JP1 JP2 JP3 JP4 Access Cover RF Receiver Program Button Program LED P/N DLARMINS REV:A DLA2RM-2 Room DLA4RM-4 Room DLA6RM-6 Room NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installat...

Other models in this manual:
Remote Control - DLA4RM (270.02 kb)
Remote Control - DLA6RM (270.02 kb)

Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category