Votes - 0, Average rating: 0
(
)
)
|
manual abstract
5. All other Modes will now punch-through to your chosen Mode for Volume/Mute control. 6. All “Visual” and “Audio” programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control. Setting any Mode to use its own Volume/Mute Control This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/ Mute buttons will do nothing. 1. Press and hold the SETUP button until the red indicator turns on, then release the button. 2. Press and hold the MUTE button until the red indicator blinks off, then release the button. 3. Press and release the desired Mode button (TV, VCR, etc.), the red indicator blinks then stays on. 4. Press and release the VOLUME-(Down) button, the red indicator blinks then stays on. 5. Press and release the MUTE button and the red indicator turns off. 6. All “Visual” and “Audio” programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control. 12 13 Troubleshooting Setup, cont. TV/VCR/INPUT Remote does not operate your product. When in TV mode the TV/VCR/INPUT button performs the INPUT source switch function. When in a mode that has been programmed for VCR the TV/VCR/INPUT button performs the TV/VCR antenna switch function. When in a mode that has been programmed for Cable the TV/VCR/INPUT button performs the A.B switch function. When in a mode that has been programmed for SAT the TV/VCR/INPUT button performs the TV/SAT switch function. When in a mode that has been programmed for DVD the TV/VCR/INPUT button performs the DVD Setup function. • Press the mode button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product. Remote does not operate some features of your product. • Program remote with a new code. • Remote may not be able to operate all features of your product or button names might be different than your product. Red Indicator blinks after you program a product code. • Remote did not accept the code. • Try to program the code again or try a different code. For help with setup, please call: 919-573-7854. Limited Lifetime Warranty The manufacturer warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for as long as you own this product. This warranty extends only to the original purchaser of the product, and is nontransferable. Defective products, together with the dated proof of purchase, must be returned to the place of purchase for repair or replacement. THERE ARE NO OTHER EXPRESS WARRANTIES. Incidental and consequential damages are disclaimed where permitted by law. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Made in China. Quality Assured in USA. Ledgewood, NJ 07852 14 15 Introduccion Indice Introduccion ......................................................... 17 Funciones de botones ..................................... 18 Funciones de DVD y Satelite ......................... 20 Preparacion .......................................................... 21 Instalacion de baterias .................................... 21 Ahorrador de baterias ..................................... 21 Almacen de codigos ....................................... 21 Encendido por omision .................................... 21 Fijacion de codigos ......................................... 21 Ingreso de codigos ............................................... 22 Ingreso directo de codigos .............................. 22 Busqueda de codigos ...................................... 22 Busqueda de codigos por marca .................... 23 Identificacion de codigos ..................................... 24 Cronometro de apagado automatico .................... 24 Codigos de programacion de equipos combinados ............................................. 25 Control de equipos combinados ........................... 25 Control de equipos con Encendido y Apagado .... 25 Control de VCR/DVD/DVR ............................... 26 Control de volumen/silencio ................................. 26 Ajuste de control volumen/silencio ...................... 27 Ajuste de cualquier modo para utilizar su propio control de volumen/silencio ....................... 27 TV/Videocasetera/Entrada .................................. 28 Localizacion y reparacion de averias .................. 29 Felicitaciones por su compra del Control remoto universal Philips. Los controles Philips le permiten sustituir un control remoto descompuesto o perdido, o combinar mas de un control remoto en una sola unidad. Este control remoto opera las funciones comunes de la mayoria de los modelos y marcas de equipo de video de control por rayos infrarrojos (pero...