Votes - 0, Average rating: 0
(
)
)
|
manual abstract
. STORED (second line) You have learned your SBC RU 865 a new code. If you want to copy more functions from your original remote control, start again from step 7. Press SETUP to exit the menu. Tip: Choose keys that correspond with the keys on your original remote control, so that you can remember them easily. If the SBC RU865 displays ERROR for a second, followed by ORIGIN the SBC RU865 did not receive the signal correctly. In this case you should: • Vary the distance slightly between both remote controls and try again from step 1 (try this several times). • This time you should press and immediately release the function key on your original remote control. The LCD should display STORED, indicating that the RU865 received the signal. • Make sure that both remote controls have new batteries. • Try to copy your codes under different lighting conditions. Light from TL-tubes may influence the signal you are copying. The SBC RU865 is designed and tested extensively and is ready to copy almost all infrared remote control signals. In some rare instances manufacturers use infra-red signals that cannot be copied to any remote control. You should of course always tr y the Autosearch to see if such a code is included in our pre-programmed librar y. Copy key functions It is possible to copy key functions from keys in one device mode (e.g. TV mode) to keys in another device mode (e.g. DVD mode) so you can operate different devices without changing mode. For example: you can put the TV in Standby while being in DVD mode. 1 Press and hold SETUP until SETUP lights up in the display. . DEV (first line) . ADD (second line) 2 Use the Device Selection keys to select KEY. . KEY (first line) 3 Use SMART CONTROLS to select COPY. . COPY (second line) 4 Confirm with SEND. . FROM (first line) 5 Use SMART CONTROLS to select the device you wish to copy key functions from. . TV (for example - second line) 6 Confirm with SEND. XP SBC RU 865.1 15-08-2002 10:26 Pagina 8 8 ENGLISH 7 Press a key to copy from. (The keys below the part-line, Standby key, and the SMART CONTROLS can be copied.) Note: Select a Smart Control with the SMART CONTROLS and press SEND to copy. . TO (first line) 8 Use SMART CONTROLS to select the device you want to copy the key function to. . DVD (for example - second line) 9 Confirm with SEND. 10 Press the key you want the function to be copied to. . STORED (second line) Note: Select a Smart Control with the SMART CONTROLS and press SEND to copy. Macro keys With a macro key you can operate a series of functions by pressing one single key. E.g. switching on all devices installed with one key. 1 Press and hold SETUP until SETUP lights up in the display. . DEV (first line) . ADD (second line) 2 Use the Device Selection keys to select KEY. . KEY (first line) 3 Use SMART CONTROLS to select MACRO. . MACRO (second line) 4 Confirm with SEND. 5 Use SMART CONTROLS to select the device on which you want to install the Macro. . TV (for example - second line) 6 Confirm with SEND. 7 In TV mode, press a key where the macro should be stored. . MACRO (first line) . START (second line) Notes: - Press the keys in the sequence that you want your equipment to respond. -The keys below the part-line, STANDBY key, and the SMART CONTROLS can be macro keys. -Select a smart control with the SMART CONTROLS and press SEND to select as macro key. -After ever y key press SMART ADDED is displayed. 8 Start pressing the keys you want to store in the macro. If necessary by navigating trough different device modes and smart controls. Note: Press SHIFT + SEND to store a Smart Control into the macro. 9 Press SEND. . STORED (second line) 2. Smart controls With the programmable SMART CONTROLS you can add up to eight special features in each device mode. E.g Dolby Surround, EPG, Showview, Subtitle, etc. For example: if you have installed an amplifier with Dolby Surround, you can control that feature via a SMART CONTROL on the RU 865. A number of features has already been pre-installed in the RU 865 memor y. These features can be removed or replaced by features of your own choice. Add key 1 Press and hold SETUP until SETUP lights up in the display. . DEV (first line) . ADD (second line) 2 Use the Device Selection keys to select KEY. . KEY (first line) 3 Use SMART CONTROLS to select ADD. . ADD (second line) XP SBC RU 865.1 15-08-2002 10:26 Pagina 9 9 ENGLISH 4 Press SEND. 5 Use SMART CONTROLS to select the device to add a Smart Control function to. . AMP (for example - second line) 6 Press SEND to confirm. 7 Use SMART CONTROLS to select a Smart Control label from the library (e.g. ADD Dolby). 8 Press SEND to confirm. Notes: -The code for a function can be learned from another remote control or copied from another device mode. -With the librar y of specific Home Cinema and other labels you are able to label the more exotic functions and store them as Smart Controls. Remove key 1 Press and hold SETUP until SETUP lights up in the display. . DEV (first line) . ADD...