Votes - 3, Average rating: 3.3
(
)
)
|
manual abstract
6.After completing the call press TALK again and return handset to base unit. HOWTODIALORRECEIVEACALLBOOSTTALKMENUCL/FLRD/PABCGHIPQRSWXYZJKLTUVDEFMNO1247890563*# 1234 1 Volume Control The dial controls the volume level of the handset, headset or neckloop. 2 Boost When pressed, an extra level of amplification is added over the entire range of volume control. (Digital Clarity® PowerTM Technology) 3 Speaker Press to activate handset speakerphone. Press again to switch back to earpiece. 4 Talk Press TALK button and dial number to make a call. To end call press TALK again. 5 Tone The C4230HS has four (4) AUDIO TONE settings. Pressing the TONE button changes the style of amplification and allows you to customize your hearing experience. INTERCOMTONEHEADSETNECKLOOPRINGERON/ OFF56 Hearing loss is specific to each individual; therefore, we suggest exploring each setting to find the one you find most comfortable. (see main User Guide for a complete description of available audio profiles) 6 Ringer On/Off Switch to turn Handset Ringer On or Off. Additional information can be found in the C4220 or C4230 User Guide. TROUBLESHOOTING The unit will not operate/no dial tone: • Verify the AC Adapter is securely plugged into AC outlet, the base and the telephone. • Verify the telephone line cord is securely plugged into the wall jack and the telephone. • Make sure the battery has been placed in the battery compart- ment correctly. (The circular metal contacts on battery need to touch the metal springs inside battery compartment.) • Make sure the handset battery is fully charged. • Verify the telephone is in the correct dialing mode tone (touch) or pulse (rotary). • Make sure you are in the usable range of the base station. The phone does not ring when you receive a call: • Make sure the RINGER switch on the handset is set to ON. • Verify the AC Adapter is securely plugged into the AC outlet, and the base. • Verify the telephone line cord is securely plugged into the wall jack and the telephone. • Make sure you are within the usable range of the base station. • You may have too many extensions on your line.Try unplugging a few devices. Noise, Static, Interference or Other Calls Heard while Using the Handset: • Make sure you are within the usable range of the base station. • Make sure the handset battery is fully charged. • Try relocating the base unit to another location. • Make sure the AC Adapter is not plugged into the wall outlet with other appliances. TROUBLESHOOTING Phone Will Not Hold Charge: • Make sure the charging contacts on the handset and base are free of dust and dirt. While unplugged, clean the contacts with a soft cloth. • Make sure CHARGE LED on the base is lit when the handset is in the cradle. • Handset battery may have developed a memory, due to user improperly charging, and may need to be replaced. (Battery must be charged a full 12 hours before the first use.) Difficulty in Placing or Receiving Calls: • Move closer to the base and try again. • Make sure you have selected the correct dialing mode, tone or pulse. • Make sure the AC Adapter is not plugged into a wall outlet with other appliances. Disconnect for 5-10 seconds then reconnect. Place the handset back on the base and reinsert the AC Adapter. • Make sure the handset battery is fully charged. Your handset screen is showing Out of Range • Move closer to the base. • To register the C4230HS, place the C4230HS handset into the main unit until the screen displays: Handset Registered. It will take approximately 5-10 seconds for the handset to register to the base. • Handset may need to be re-registered to the base manually. First, select INITIAL SETUP on the main menu. Second, select REGISTRATION on the sub-menu.The screen will then display “Please hold the page button until beep.” This will register your handset to the base.The screen will then display the handset number. TECHNICAL SPECIFICATIONS General Model Number: C4230HS Frequency: 5.8 GHz Amplification: 50 dB Compatibility: C4230 and C4220 Handset Unit Product in Inches: (L x W x H): 7.25 x 2 x 1.25 Weight in Pounds: 0.5 lb Base Product in Inches: (L x W x H): 3.50 x 2.75 x 2 Weight in Pounds: .50 lb Power Supply: AC Adaptor (Input: 120V AC, 60 Hz; Output: 9V DC, 500mA) Handset and Base Product in Inches (L x W x H): 8 x 3.25x3.25 Weight in Pounds: 1.10 lbs Battery Information Battery Type: Ni-MH AAA 800 mAh 3.6V Battery Life Talk Time: 3-4 Hours Battery Life Standby: 6 days Contact Clarity customer service for information on purchasing additional handsets or replacement battery. Clarity Contact information Customer Service: 1-800-426-3738 Address: 4289 Bonny Oaks Drive, Suite 106 Chattanooga,TN 37406 REGULATORY COMPLIANCE Part 68 of FCC Rules Information a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested,...