Votes - 3, Average rating: 4.7
(
)
)
|
manual abstract
1 13 Base Station 1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and place your cordless telephone on a level surface, such as a desktop or tabletop, or you may mount it on the wall. 2. Plug one end of the telephone line cord into the TEL LINE jack on the back of the base and the other end into a modular jack. 3. Plug the AC power converter into the electrical outlet and the DC connector into the jack on the back of the base. 4. Place the handset in the base cradle. The charge/in use indicator turns on, verifying the battery is charging. 5. Allow the phone to charge for 16 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised. CAUTION: To reduce risk of personal injury, fire, or damage use only the 5-2812 power adaptor listed in the user’s guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position. Programming the Telephone Standby Screen The handset displays the handset number and user name. Programming Functions The system uses a menu structure to give you access to all of the built-in features. You may program the following items in main menu: Phone book, Room Monitor, Alarm Clock, Initial Setup, Sound Setup, Reset Settings. Room Monitor (applicable only with additional handsets) 1. Make sure your phone is OFF (not in TALK mode). . Press the mute/menu OK button to go to the main menu. . Press caller ID-volume (6 or 5) button to scroll to ROOM MONITOR. . Press the mute/menu OK button to enter ROOM MONITOR menu. The screen displays ROOM MONITOR EXTENSION?. 1 5. Use the touch tone pad to enter the handset name/number to be monitored. NOTE: When this phone system is expanded (up to 6 handsets by purchase of optional Model 28203 handset with recharge cradle), handsets are named HANDSET 1, HANDSET 2, HANDSET 3 and so on respectively. 6. The receiving handset will turn on the microphone and the originating handset will turn on the speakerphone to monitor sound from the receiving handset. NOTE: For room monitoring mode to work, the originating handset must NOT be on the cradle. NOTE: While in room monitoring mode, the handsets will emit an alert tone approximately every 5 seconds if there is an incoming call. You may press the TALK/SPEAKER button to quit room monitor and answer the call. NOTE: While in room monitoring mode, the originating handset can be switched to monitor by handset earpiece by pressing the TALK/SPEAKER button once. Switch back to speakerphone by pressing the TALK/SPEAKER button once. NOTE: Press the END button on the handset to exit room monitor mode. Alarm Clock 1. Make sure your phone is OFF (not in TALK mode) . Press the mute/menu OK button to go to the main menu. . Use the caller ID-volume (5or 6) button to scroll to ALARM CLOCK. . Press mute/menu OK button to enter the menu. The screen displays ON > OFF. 5. Use the caller ID-volume (5or 6) button to select ON or OFF. Press mute/menu OK button to confirm. 6. If ON is selected, then the screen displays SET ALARM TIME. Use the number keys to enter the alarm time (for example, 0 :10PM) key in 0 10. Use the caller ID-volume (5or 6) button to select AM or PM. 7. Press mute/menu OK button to display >ONCE OR DAILY and select ONCE or DAILY. 8. Press the mute/menu ok button to save selection. You will hear a confirmation tone and return to main menu. Initial Setup 1. Make sure your phone is OFF (not in TALK mode). . Press the mute/menu OK button to go to the main menu. . Press caller ID-volume (6 or 5) button to scroll to INITIAL SETUP. . Press the mute/menu OK button to confirm and you may program the following items: Handset Name, Date and Time, Area Code, Tone/Pulse, Language, Auto Talk, Registration, Deregistration. NOTE: During programming, you may press the END button at any time to exit the sub-menu and return to the menu. Handset Name From the Initial Setup Menu: 1. Press the caller ID-volume (5or 6) button to scroll to the HANDSET NAME sub-menu. . Press mute/menu OK button to enter the menu. The screen displays HANDSET NAME. . Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the key twice for the letter B. Press the key times for the letter I. Press the 5 key times for the letter L. Press the 5 key times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key times for the letter S; press the 6 key once for the letter M; press the key times for the letter I; press the 8 key for the letter T; press the key twice for the letter H. NOTE: If you make a mistake, use the delete/int/conf button to backspace and delete one character at a time. . Press the mute/menu OK button to save your name. You will hear a confirmation tone and the handset name shows in the display. Date and Time From the Initial Setup Menu: 1. Press the caller ID-volume (5or 6) button to s...