Votes - , Average rating:
(
)
)
Manafacture: GE
File size: 1.37 mb
File name: 412865fb-1d83-48b8-8c26-2a82e980f77e.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
SET AREA CODE — shows in the display. The default setting is —. 3. Use the touch-tone pad to enter your 3-digit area code. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new area code shows in the display. NOTE: To restore the default setting to —, press and release the del/conf/ intercom button when SET AREA CODE shows in the display. Tone/Pulse From the Handset Setup Menu: 1. Press the vol/CID ( 5 or ▼) button to scroll to the TONE PULSE sub-menu. 2. Press the menu ok/mute button to enter the menu. TONE/PULSE 41TONE 2PULSE shows in the display. The default setting is ”1 TONE". 3. Use the touch-tone pad or vol/CID ( 5 or ▼) to enter 1 TONE or 2 PULSE. 4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and your selection shows in the display. Registration Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be registered again unless absolutely necessary. From the Handset Setup Menu: 1. Press the vol/CID ( ▼ or 5) button to scroll to the REGISTRATION sub-menu. 2. Press the menu ok/mute button to enter the menu. REGISTRATION 1YES 4 2NO shows in the display. The default setting is 2NO. 3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the vol/CID ( ▼ or 5) button to scroll to 1YES or 2NO. 4. If you select YES, press the menu ok/mute button. HOLD BASE PAGE FOR 5 SECONDS, THEN PRESS HANDSET MENU OK shows in the display. (Your handset should be held near the base during registration process.) 16 5. Press and hold the page button on the base unit until the in use indicator flashes. Press the handset the menu ok/mute button. REGISTERING shows in the display. HANDSETX REGISTERED shows in the handset display, where X is the handset number. You may now rename your handset. (Refer to Step 3 & 4 of Handset Name Section) NOTE: IF you are re-registering the handset through the handset menu; to rename your handset you must go to the Handset Name Section and start from the beginning step. De-Registration De-registration cancels registration. During the de-registration process, keep the handset near the base. From the Handset Setup Menu: 1. Press the vol/CID ( ▼ or 5) button to scroll to the DEREGISTRATION sub-menu. 2. Press the menu ok/mute button to enter the menu. DEREGISTRATION 1YES 4 2NO shows in the display The default setting is 2NO. 3. Use the touch-tone pad to select 1 for YES or 2 for NO. Or use the vol/CID ( ▼ or 5) button to scroll to 1YES or 2NO. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset's telephone features cannot be used until the handset is re-registered. 4. Select NO, if you do not want to de-register 5. If you select YES, press the menu ok/mute button and MOVE NEAR TO BASE displays for 2 seconds, then CONFIRM? 1YES2NO appears in the display. 6. Press the touch-tone pad to select 1 for YES or 2 for NO, or use the vol/CID ( ▼ or 5 ] button to scroll to 1YES or 2NO. 7. If you select YES, press the menu ok/mute button to confirm. DE-REGISTER... shows in the display. You will hear a confirmation tone. Then HANDSETX DEREGISTERED shows in the display to confirm the handset is deregistered. NOTE: When you complete the de-registration process, HANDSET NEEDS REGISTRATION shows in the display. To use the handset, you MUST re-register the handset using the Registration process. 17 Global De-registration If one or more handsets becomes lost, you should de-register all handsets to ensure proper system operation. Follow the steps below to de-register all handsets at the same time. WARNING: It is not recommended that a handset be de-registered unless absolutely necessary because once a handset is de-registered, that handset's telephone features cannot be used until the handset is re-registered. 1. Disconnect power from the base by pulling the plug out of the back of the unit. 2. Press and hold the page button and while holding the page button reconnect the power 3. Continue to hold the page button until the in use indicator flashes rapidly. 4. Release the page button. 5. Press and release the page button on the base once. All handsets are de-registered and HANDSET NEEDS REGISTRATION shows in the display. Default Setting As you become familiar with this system, you may prefer to use the system's original settings. Follow the steps below to return to the factory default settings. From the Handset Setup Menu: 1. Press the vol/CID ( ▼ or 5) button to scroll to the DEFAULT SETTING sub-menu. 2. Press the menu ok/mute button to enter the menu. DEFAULT SETTING 1YES 2NO shows in the display. The default setting is 2NO. 3. Use the touch-tone pad to select 1YESor 2NO, or use the vol/CID ( ▼ or 5) button to move the cursor to 1YES or 2NO. NOTE: If you choose YES all the settings in the programmable menu are returned to factory default setting. 4. Press the...