Votes - 2, Average rating: 3 ( )

Manafacture: Chamberlain File size: 1007.02 kb File name: 114A3000.pdf Language of manual:

Each application is unique, it is the responsibility of the purchasers, designer, installer and end user to ensure that the total control access system is safe for its intended use. Please refer to the manuals and/or qualified technician for further information. NOTE: The default password is “Manager.” 1. Click the NEW UNIT ICON Enter Unit Name and Unit Type 1 Enter Country, State/Prov. and City 2 Click OK3 2. Click the Unit Configuration ICON and Select the CONTROL SETTINGS Tab 21Uncheck the “Use Telephone Service” check box 2 Click on the “Edit” button 1 113. Select the DEVICES Tab 4. Select the RELAYS Tab 5. Click the DOORS Tab Click on the “Device Configuration Wizard” button 1 Choose “Wiegand Device” for J400 3 Rename “Device 1” to “Pedestrian Reader” 5 Choose “None” for J407 2 Click OK4 12Activation Times: Set Relay Groups: 2 Relay # Relay Name Relay Type Relay Activation Time 1 Vehicle Gate Strike 2 Seconds 2 Vehicle Light Control 30 Seconds 3 Pedestrian Gate Strike 10 Seconds 4 Video Camera CCTV 60 Seconds Relay Group Name Auto Sensor Group Vehicle Gate Group Pedestrian Group Vehicle Gate X X X X X Vehicle Light Pedestrian Gate Video Camera Rename “Door 1” to “Gate Operator” Select “Vehicle Gate Group” from the drop-down menu 2 1Rename “Door 2” to “Pedestrian Gate” and select “Pedestrian Reader” for the Device 3 Select “Pedestrian Group” from the drop-down menu 4 Click SAVE5 4Pedestrian Gate 52345DisabledDisabled Enter Last Name1 Enter Display Info2 NOTE: The unit uses Display Info for transactions when the Entry Code or Credential Code is used. 7. Click the ACCESS DETAILS Tab6. Click the NEW TENANT ICON Enter an Entry Code (optional) 1 Click on Select and create a new Credential (optional) 2 NOTE: A credential is a generic term when referring to a transmitter or swipe card. 111228. Click the AUTO CONFIGURATION ICON OK The Custom Configuration screen will open A pop-up window will inform you that the Connect Set was sucessfully tested. NOTE: If “Test It” button fails, try one of the following: If the problem persists, please call technical support. If a window appears informing you to close all applications, make sure to close other applications and click Wait for Versa XS to identify modems 1 45Check the “Use This Connect Set for Unit” check box 4 1. Be sure your modem is turned on. 2. Check the appropriate Connection Mode (Direct or Modem) type confirms with the selected COM port (see you computer’s COM settings). 3. Close any other application using the COM port. 4. Close any other applications. 9. Click the TRANSFER DATA ICON Check Configuration and Tenant Info in the Send Data to Unit frame1 12123Select a Connect Set from the “Connect Set” list 2 Click OK3 Click “Test It” then 5 click Click START2 NOTE: If a mismatch message/warning appears click OK. Enter Last Name1 Enter Display Info2 NOTE: The unit uses Display Info for transactions when the Entry Code or Credential Code is used. 7. Click the ACCESS DETAILS Tab6. Click the NEW TENANT ICON Enter an Entry Code (optional) 1 Click on Select and create a new Credential (optional) 2 NOTE: A credential is a generic term when referring to a transmitter or swipe card. 111228. Click the AUTO CONFIGURATION ICON OK The Custom Configuration screen will open A pop-up window will inform you that the Connect Set was sucessfully tested. NOTE: If “Test It” button fails, try one of the following: If the problem persists, please call technical support. If a window appears informing you to close all applications, make sure to close other applications and click Wait for Versa XS to identify modems 1 45Check the “Use This Connect Set for Unit” check box 4 1. Be sure your modem is turned on. 2. Check the appropriate Connection Mode (Direct or Modem) type confirms with the selected COM port (see you computer’s COM settings). 3. Close any other application using the COM port. 4. Close any other applications. 9. Click the TRANSFER DATA ICON Check Configuration and Tenant Info in the Send Data to Unit frame1 12123Select a Connect Set from the “Connect Set” list 2 Click OK3 Click “Test It” then 5 click Click START2 NOTE: If a mismatch message/warning appears click OK. 2. Click the Unit Configuration ICON Select the DEVICES Tab 1. Click the NEW UNIT ICON Enter Unit Name and select the correct Unit Type 1 Enter Country, State/Prov., City and Phone Number 2 Enter Phone Number to dial into unit 3 Click OK4 3. Select the RELAYS Tab 4. Click the DOORS Tab 1125364Click on the “Device Configuration Wizard” button 1 Choose “RF Receiver” for “J407” 2 Rename “Device 1” to “Back Door Reader” 5 Rename “Device 3” to “Gate Receiver” 6 Choose “Wiegand Device” for “J400” 3 Click OK4 12Set Relay Names, Relay Types and Activation Times: 1 Set Relay Groups: 2 Relay # Relay Name Relay Type Relay Activation Time 1 Front Strike Strike 10 Seconds 2 Security Light Control 60 Seconds 3 Back Strike Strike 10 Seconds 4 Gate Strike 2 Seconds Relay Group Name Front Door Group Back Door Group Gate Gr...

Download now

Please, enter two numbers from picture: