Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
Lift the handset. Intercom dial tone 2. Dial the extension number. Ring or busy tone 3. While the telephone is still ringing, or when you hear the busy tone, enter the Message Wait Set code (default = 4). 4. Replace the handset. 576-50-700 DBS 576HD (USA) issued September 2001 7-29 Chapter 7. SLT Features Section 700 - Operation To answer a message waiting indication (Callback): Action Result 1. Lift the handset. Stutter dial tone 2. Enter the Message Wait Callback code (default = *6). Telephone automatically dials extension that set Message Waiting Indication To cancel a Callback Message: Action Result 1. Lift the handset. Intercom dial tone 2. Enter the Callback Request Cancel code (default = *5). 3. Replace the handset. Hardware Requirements • N/A Related Programming • FF1-0-03: Extension COS (Message Wait set/cancel) • FF1-0-03: Extension COS (Priority Message Wait set/cancel) • FF1-2: Dial Plan • FF3: Extension COS Considerations • The System has priority message waiting for 3rd-party voice mail. See “Voice Mail Integration (Third Party)” on page 69. Offhook Signaling Description Offhook Signaling sends a tone over the handset to a busy extension to indicate that a CO call has arrived or a call is camped-on. Prior to Version 3.6, users receiving an offhook signal during a conversation had to end the call before answering an incoming call. Beginning with Version 3.6, users receiving an offhook signal during conversation can press and release the hook quickly (hookflash) to place the current call on hold and answer the incoming call. After receiving an offhook signal during a call: Action Result 1. Complete the first call and place the handset on hook. First call is terminated. 2. After the telephone rings, go off hook. Incoming call is answered. 7-30 DBS 576HD (USA) issued September 2001 576-50-700 Section 700 - Operation Chapter 7. SLT Features OR Action Result 1. Press and release the hook quickly (hookflash). First call is placed on hold; incoming call connects. 2. Press and release the hook quickly to go back to the original call. First call connects again. NOTE: The steps outlined above can be performed only when the necessary settings have been programmed into the system. Hardware Requirements • N/A Related Programming • FF3: CO Off-Hook Signal • FF1-1: Off-Hook Signal Timer Considerations • The CO call type may be either multiple ring, or DID/DIL whose destination is set to Auto campon (Call Waiting). • Offhook signaling is not supported for an ISDN terminal. • The System does not send the offhook signal under the following conditions: • During a conference call • During an OHVA or Busy override • Data Privacy is enabled • Receiving telephone is a 3rd party voice mail. Offhook Voice Announce Description You can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook Voice Announce (OHVA) feature to make an announcement. Operation To make an OHVA : Action Result 1. Lift the handset. 2. Dial the extension number. Busy signal 3. Enter the OHVA Access code (default = 8). 4. Make your announcement 576-50-700 DBS 576HD (USA) issued September 2001 7-31 Chapter 7. SLT Features Section 700 - Operation Hardware Requirements • N/A Related Programming • FF1 0 03 (System): Extension COS OHVA Originate • FF1 0 03 (System): Extension COS OHVA Receive • FF3 (Extension): Extension COS Assignments • FF4: FF Key Assignment Considerations • If On hook Transfer is enabled, the held call is transferred as soon as the extension sending the OHVA hangs up. • You cannot receive a Call Waiting message during an OHVA. • If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement. Paging Description The System allows you to make both internal and external pages and announcements. Internal pages are made via the System’s key telephone speakers. External pages are made through the speakers of an external paging system connected to the System. Paging calls can be answered from any extension using the Meet-Me Answer feature. Operation To make a page: Action Result 1. Lift the handset. Intercom dial tone 2. Enter the Group Paging code (default = #). 3. Enter the number of the desired Paging group (0-9). 4. Make your announcement. 5. Replace the handset. Meet-Me Answer To answer a page using Meet-Me Answer: Action Result 1. Lift the handset. Intercom dial tone 2. Enter the Meet Me Answer code (default = ##). Connected to specified party 7-32 DBS 576HD (USA) issued September 2001 576-50-700 Section 700 - Operation Chapter 7. SLT Features Hardware Requirements • External relays, amplifier, and speakers are required for external paging. Related Programming • FF1-0-02: Paging Override • FF1-0-03: Extension COS (Paging) • FF1-0-04: Trunk COS (Paging) • FF1-2: Dial Plan • FF2: Trunk COS • FF3: Extension COS Considerations • If an external paging system has...