Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
This option requires one or more -n or -g options. Note: On Windows and HP-UX CMS, vseassist will obtain the port on which to attempt managed node communication from the file globalsettings.props (see FILES section below). If no port configuration is present, port 22 will be used. -r (Remote) From the CMS, check the configuration of the HP-UX or Windows managed systems specified by the -n and -g options (vseassist does not provide configuration checks for Linux managed systems). This option uses mxexec to copy the vseassist command to the managed systems, where it is executed with the -s option. In order for the -r option to succeed, the CMS must be able to communicate with the managed systems (as checked by the -l option). This option requires one or more -n or -g options. -n nodename (Node) Specifies the name of a VSE managed system, using the node name by which the system is known to the CMS (as reported by 41 mxnode(1M)). Multiple -n and -g options can be used to specify multiple systems. Note: This command is only designed to diagnose problems with sytems that are part of the All VSE Resources collection. Applying this command to other resources using -n or -g options will not produce useful results. -g collectionname (Group) Specifies the name of a collection of systems known to the CMS. The specified checks will be performed for each of the managed systems in the collection. Multiple -n and -g options can be used to specify multiple systems. Note: System or collection names that include spaces must be enclosed in quotes. Refer to mxquery(1M) for more information about collections under HP SIM. -q (Quiet) No output will be generated on stdout or stderr. The results will still be logged to the vseassist.log file. -s (System) This option is used when running vseassist directly on HP-UX or Windows managed systems (vseassist does not provide configuration checks for Linux managed systems). Some of the problems detected with this option include missing WBEM providers, stalled WBEM process, and missing required patches. On an HP-UX managed system, WBEM services checks will be performed by wbemassist if wbemassist version 1.1 or later is installed. Otherwise vseassist will use its own built-in WBEM checks. Note: wbemassist checks for problems in HP-UX WBEMServices and recommends solutions. It does not perform checks on WBEM Providers or other services that use the CIM server. For more information, see wbemassist(1M). When you use vseassist with the -r option on the CMS, mxexec will remotely execute vseassist on the managed systems using the -s option. -h cms (Host) Specifies the fully qualified domain name of the CMS that is managing the system. This option is passed to the remote execution of vseassist when you use the -r option on the CMS. Installation The vseassist command is installed on the CMS when Insight Dynamics is installed. RETURN VALUES 0 The command completed successfully and no FAIL results were found. 1 The command completed successfully and one or more FAIL results were found. 2 Warnings, but no FAIL results were found. 3 Incorrect options were specified; the command syntax is displayed. 4 An unexpected internal error occurred. Contact your HP Support Representative, your HP Services Representative, or your authorized HP reseller for assistance. EXAMPLES The specific checks performed may vary by operating system and system type of the CMS and managed systems. The following examples show the kind of output that is produced, but the details may be different in your environment. Check the configuration of a CMS named unixsys: # vseassist -c 42 Command reference Version: A.6.0.0.* +-----------------------------------------------------------------------------------------------+ | Performing CMS configuration verification | +-----------------------------------------------------------------------------------------------+ unixsys: HP SIM running.........................................................................[PASS] HP SIM memory configuration............................................................[PASS] HP Insight Dynamics - VSE suite running................................................[PASS] Localhost name resolution..............................................................[PASS] ID-VSE manageable systems discovered in HP SIM.........................................[PASS] Application Discovery server running...................................................[PASS] File system free space.................................................................[PASS] Java JRE installed.....................................................................[PASS] Virtual Machine Management runnning....................................................[PASS] VMM responsive.........................................................................[WARN] WARNING: HP SIM has discovered one or more virtual machine hosts servers, but the VMM plugin is not fully configured to manage the following servers: ...
Other models in this manual:Software - HP Consolidation Pack for HP ProLiant 100 server Licenses (858.35 kb)
Software - HP Matrix Operating Environment w/Insight Control 24x7 Supp 1 Server Lic (858.35 kb)
Software - HP Matrix Operating Environment w/Insight Control 24x7 Supp E-LTU (858.35 kb)
Software - HP Matrix Operating Environment w/Insight Control 24x7 Supp Flexible Lic (858.35 kb)