Votes - 1, Average rating: 3
(
)
)
|
manual abstract
Do’s and Don’ts 01. Open the bezel door. 02. Press the release button. Pull the locking lever and remove the HDD tray. 03. 04. Slide hard disk into blank. Secure the hard drive to the tray with 4 screws as shown. Do not over tighten the screws. Slide the blank into the bay until it locks into place. 05. 06. Press power button to boot up. Power & NetworkConnections or Cable port on the wall Cable / ADSL / VDSL modem IP Router PC or Notebook Power cable Internet Please refer to the following figure how to install an internal hard disk of GR-EZI04H. Back up your system periodically to avoid any potential data loss. GIGABYTE disclaims any responsibility of all sorts of data loss or recovery. Should you return any components of GR-EZI04H package for refund or maintenance, make sure they are carefully packed for shipping. Any form of damages due to improper packaging will not be compensated. Hardware Processor : Intel D2550 1.86GHz Dual-Core processor Memory : DDR3 4GB Internal HDD : 3.5” SATA II x 4 Hot-swappable I/O Interface : 2 x RJ45, 2 x USB 2.0, 2 x USB 3.0, 1 x D-Sub VGA LAN : 2 x 10/ 100/ 1000Mbps Size (HxWxD) : 220 x 183.5 x 146.5 (mm) Weight : 3.5kg excluded HDD Max Internal Capacity : 16TB (4 x 4TB) Front LED : 1 x PWR, 1 x SYS, 1 x EXT, 4 x HDDs, 2 x LANs Power : External 90W power adapter Warranty 1 year limited hardware warranty and software technical support. To extend warranty, please contact GIGABYTE sales team. PC Operating System Support File sharing for computers running on: Microsoft Windows 7 32 & 64-bit Microsoft Windows Vista 32 & 64-bit Microsoft Windows XP Home SP2 Microsoft Windows XP Professional SP3 Mac OS X or later VDI (virtual desktop infrastructure) is enabled to let users connect to system by their notebook or tablet devices, sharing applications on GR-EZI14H. Remote access & system backup to computers running on: Microsoft Windows 7 32 & 64-bit Microsoft Windows Vista 32 & 64-bit Microsoft Windows XP Home SP2 Microsoft Windows XP Professional SP3 Package Contents Front LED 1 3 5 7 2 4 6 8 9 Use the at head screws in the product package to secure the hard disks into the GR-EZI04H. Do not place GR-EZI04H in direct sunlight or near chemicals. Make sure the temperature and humidity of the environment are in optimized level. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Unplug the power cord and all connected cables before cleaning. Wipe GR-EZI04H with a damp towel. Do not use chemical or aerosol to clean GR-EZI04H. GR-EZI04H can operate normally in the temperature of 5.~35. and relative humidity of 0%~90%. Please make sure the environment is well-ventilated. The power cord and devices connected to GR-EZI04H must provide correct supply voltage. Do not place any objects on top of the GR-EZI04H as this may cause overheating and interfere it’s normal operation. Do not place GR-EZI04H near any liquids. Do not place GR-EZI04H on any uneven surfaces as to avoid it falling o and getting damaged. Do not attempt to repair your GR-EZI04H under any conditions. Improper disassembly or the product may expose you to electric or other risks. Description Solid Blue: System is power-on When device is plugged in USB 3.0 port Solid Blue: Network link / Blinking Blue: Network activity Solid Blue: Disk detected Blinking Blue: Disk activity Solid Blue: System power ON 1) System LED 2) External LED 3~4) LAN LED 5~8) Disk LED 9) Power LED Main unit x 1 (screws, key & Disk label in HDD tray) Adapter & Power cord x 1 RJ-45 LAN cable x 2 (Warning) If you install a hard disk that contains data, please back it up before installation just in case. Create Windows Home Server 2011 Software RAID OS Installation Steps USB Keyboard USB Recorder Signal Cable 7. Power-o the GR-EZI14H. 6. The setting of “SATA Mode” should be “AHCI Mode”, this is factory default value, showed as following. If the setting is dierent, change it to “AHCI Mode”, and then save to exit. 5. Switch to “Advanced” screen and view “SATA Conguration” item. 4. If you have changed BIOS item “SATA Conguration”, please power-on the GR-EZI14H, then press F2 to enter BIOS setup utility menu. 3. Leave one hard disk drive in HDD tray 1 and remove hard disk drives in other HDD tray. 19. Regarding Windows Home Server 2011 operation system product key and OVD software activation code, please check the NAS chassis bottom side’s label. 18. You can read detailed user’s manual les in the Recovery disc #2 “USER’S MANUAL” folder. 17. Windows Home Server 2011 OS username and password both “password”. 2. Connect USB keyboard in USB 3.0 port (Blue color) and USB mouse in USB 2.0 port, please refer to below picture. 1. Regarding USB recorder installation, please connect USB signal cable in USB 2.0 port, USB power cable in USB 3.0 port. (Blue color) 9. Power-on the GR-EZI14H again, then press F10 to open boot menu. 8. Put “Windows Home Server 2011 Disc 1” into USB DVD-ROM, and connect it to GR-EZI1...