Enter a 4-digit number as the Network PIN code onto the text box and click Set button. The projector begins restarting and it takes about 10 seconds. Close (Quit) the web browser and access to the login page again in 10 seconds. This is to perform the login authentication firmly. The default Network PIN code [0000] means no Network PIN code is set. . When you connect the projector to the network, it is recommended to set a new Network PIN code. Only a four-digit number is valid for the Network P

The WUX10 Multimedia Projector (hereinafter referred to as "the projector") is a high-performance projector that is capable of projecting a high-resolution computer screen and high-quality digital image on a large screen. Major Features Smooth and Beautiful Imaging Capability Incorporation of AISYS, Canon's unique optical engine, and the world's first 0.71-inch WUXGA (1920 x 1200 resolution) LCOS (Liquid Crystal On Silicon) panel achieves a high brightness, high contrast, and smooth and beautifu

Full Provides the full screen image. Digital zoom + When the Digital zoom + is selected, the On-Screen Menu disappears and “D. Zoom +” appears. Press the OK button to expand the image size. Press the POINT UP/DOWN/LEFT/RIGHT buttons to pan the image. The Panning function can work only when the image is larger than the screen size. The projected image can be also expanded by pressing the D.ZOOM ^ button on the remote control unit. Digital zoom – When the Digital zoom – is selected, the On-Screen

-Do not use any power cables than the supplied one. -Do not bend or tug the power cable excessively. -Do not place the power cable under the projector, or any heavy object. -Do not cover the power cable with other soft materials such as rugs. -Do not heat the power cable -Do not handle the power plug with wet hands. •Turn off the projector, unplug the power cable and have the object removed by a qualified service personnel under the following conditions: -When the power cable or plug is damaged

1.x of the projector. • Commands in this document are to communicate with LV-NI02, but most commands are used to control a projector remotely from a computer with RS-232C. Therefore commands in this document are defined as Expand Serial Commands. 2. Serial Interface Specification 2.1 Transfer Specification Item Specification Synchronous System Asynchronous Transmission Speed 9600 / 19200 Data Length 8 bits Parity N/A Stop Bit 1 Flow Control N/A Note1) Transmission Speed: initial setti

•Avoid excessive heat and humidity. • Do not heat, take apart, or throw batteries into fire. • If you will not be using the remote control for a long time, remove the batteries. • Ensure that you have the batteries' polarity (+/-) aligned correctly. • Do not use new and old batteries together, or use different types of batteries together. • Dispose of used batteries according to your local regulations. vi Table of Contents Important Information ...................................................

Chapter 3 Basic Setting and Operation Login the setting page of the projector [1] Enter the IP address Launch the web browser installed in your computer, enter the IP address into the "Address" on the browser and then press "Enter" key. Enter the address that you configured in item "Network configuration" (. p.12). * The numerical value is a setting example. [2] Login If the setting page has set the password, the authentication window will appear. In this case type "user" onto the User Name text

LV-5100 LCD Projector LV-5100 Compact and lightweight - Same size as a B5 sheet of paper - 2.7kg - Microportable High brightness - 700 ANSI-Lumens - Excellent color balance with short arc 120w bulb - Canon precision optics Quiet operation (39dBA) - Fan speed controlled by temperature sensors LV-5100 Connectivity - Component (for DVD/HDTV connection) - S-Video & composite video - Stereo Audio Mini Jack (input & output) - RS232 control - VGA input - Automatic input detection Au

Enabl ng D rect Power ON [D rect power on (AC)] Turns the projector on automatically when AC power is supplied. This eliminates the need to always use the POWER button on the remote control or projector cabinet. Turn ng On the Projector By Apply ng Computer S gnal [D rect power on (Comp )] When the projector is in Standby mode, applying a computer signal from a computer connected to the ANALOG IN-1 input will power on the projector and simultaneously project the computer’s image. This functional

(64 characters maximum) . You must use the number specified by your administrator. The address must be entered as a group with four numbers split by a dot like [192.168.001.101]. *1 Set [0.0.0.0] if the network does not provide the gateway (router). *2 Set [0.0.0.0] if you do not use the function E-Mail alert. *3 If you use the DNS server, register the host name registered to the DNS server as a projector name. You can access with this projector name from any computers in your network. If you do