Manafacture: Acer File size: 6.58 mb File name: Language of manual:

Free link for this manual available at the bottom of the page

Contrast "Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. • Press to decrease the contrast. • Press to increase the contrast. Saturation Adjusts a video image from black and white to fully saturated color. • Press to decrease the amount of color in the image. • Press to increase the amount of color in the image. Tint Adjusts the color balance of red and green. • Press to increase the amount of green in the image. • Press to increase the amount of red in the image. Color Temperature Mode Use this function to choose CT1, CT2 (Native), CT3, User mode. R Gain Adjusts the red gain for color temperature optimization. G Gain Adjusts the green gain for color temperature optimization. B Gain Adjusts the blue gain for color temperature optimization. Dynamic Black Choose "On" to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. Gamma Effects the representation of dark scenery. With greater gamma value, dark scenery looks brighter. 19 Note: "Saturation" and "Tint" functions are not supported under computer or HDMI mode. Note: Constant Brightness is available while both of "Dynamic Black" and "ECO Mode" are off. Note: Functions vary depending on model definition. English 20 Image English Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. Aspect Ratio Use this function to choose your desired aspect ratio. • Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. • Full: Resize image to fit full screen by width (1280 pixels) and height (800 pixels). • 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. • 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:9 ratio. • L.Box: Keep original signal aspect ratio and zoom in by 1.333 times. Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees) Sharpeness Adjusts the sharpness of the image. • Press to decrease the sharpness. • Press to increase the sharpness. H. Position (Horizontal position) • Press to move the image left. • Press to move the image right. V. Position (Vertical position) • Press to move the image down. • Press to move the image up. Frequency "Frequency" changes the projector's refresh rate to match the frequency of your computer’s graphics card. If you can see a vertical flickering bar in the projected image, use t...

Other models in this manual:
Projectors - S1283Hne (6.58 mb)
Projectors - S1383WHne (6.58 mb)

Download now

Please, enter two numbers from picture: