Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
--This may cause fire or electric shock, or injury due to falling. • In the event that there is a heavy impact on the product or the cabinet is damaged, switch it off, unplug it from the power outlet and contact an authorized service center. --Failure to do so may cause fire or electric shock. • Do not insert pieces of metal, such as coins, hairpins or metal debris, or flammable materials, such as paper or matches, into the product. --This may cause fire or electric shock. • In the event that liquid or a foreign object falls into the product, switch it off and unplug it from the power outlet and contact our service center. --Failure to do so may cause fire or electric shock. • Make sure that a child does not swallow the batteries when you replace the old remote control batteries with new ones. Keep batteries out of reach of children. --If a child swallows a battery, consult a doctor immediately. • Do not look directly into the lens when the product is in use. The strong light may damage your eyes. • When the product is on or has just been turned off, avoid touching the air vent because it will be very hot. • If there is a gas leak, do not touch the wall outlet. Open the window for ventilation. --A spark may cause a fire or burn. • Never touch the product or power cord during thunder or lightning. --This may cause electric shock. • Do not use the product near electronic devices that generate a strong magnetic field. • Do not wear the plastic package used to pack the product around your head. --This may cause suffocation. • Do not touch the product with your hand for a long time when it is running. • When you play a game by connecting a game console to a product, it is recommended that you maintain a distance of more than 1.5 times the diagonal length of the screen. • Make sure that the length of connecting cable is long enough. --Otherwise, the product may fall causing personal injury or damage to the product. CAUTION • Do not place a heavy object on the product. --It may fall down and cause physical injury. • Be careful to protect the lens from heavy impact during transportation. • Do not touch the cover glass of the product. • Otherwise, the cover glass may be damaged. • Do not use any sharp tools on the product, such as a knife or hammer, because this may damage the casing. • In the event that no image appears on the screen or no sound is heard, stop using the product. Switch off the product, unplug it from the power outlet and contact our service center. Failure to do so may cause fire or electric shock. • Do not drop anything onto the product or apply heavy pressure to it. --This may cause injury to persons or the product malfunction. • It is recommended that you maintain a distance of more than 1.5 - 3 times the diagonal length of the screen between your eyes and the screen. --If you watch the screen at a close distance for a long time, your eyesight may become worse. • When closing the door of the product, be careful not to jam your finger. --This may cause injury to persons or the product malfunction. • Do not block the light emitted from the product's lens with a book or a cover. Long exposure to the light may melt or burn the object, possibly causing fire. In addition, the lens may be overheated and the product may be damaged by the reflected light. Stop projecting temporarily or turn off the power. • Do not start the product with volume high. --High volume may damage hearing. Be sure to lower the volume before turning off the product. Raise the volume gradually after turning on the product. • When you go out, place the product out of reach of pets or other animals, and unplug it from the wall outlet. --Otherwise, it may cause short circuit and fire. Cleaning WARNING • Do not spray water directly to the product when cleaning. Do not allow water to get into the product or do not allow it to get wet. --This may cause fire or electric shock. • In the event that smoke or a strange smell comes out from the product or a foreign object falls into the product, stop using it. Switch off the product, unplug it from the power outlet and contact our service center. --Otherwise, this may cause fire or electric shock. • To remove dust or stains on the cover glass, use an air spray or use a swab or soft cloth to wipe the glass gently. CAUTION • Contact your seller or our service center once a year to clean the internal parts of the product. --If you do not clean the Laser Display for a long period of time, dust will accumulate, which may cause fire or damage to the product. • When cleaning plastic parts, such as the product case, unplug the power first and wipe with a soft cloth. Do not spray with water or wipe with a wet cloth. When cleaning the plastic parts, such as the product case, do not use cleanser, automobile or industrial shiner, abrasive or wax, benzene, alcohol, etc., which can damage the product. --This can cause fire, electric shock or product damage (deformation, corrosion and damage). Others WARNI...