Votes - 0, Average rating: 0
(
)
)
|
manual abstract
Cleaning DANGER! Cleaning the Lens Use a brush or lens cleaning paper for cleaning the lens of t e projector. Switching off the device! Switch the device on or off using the power switch before removing the power supply from the socket. DANGER! Instructions for Cleaning! Use a soft, lint-free cloth. Never use liquid or easily flammable cleansers (sprays, abrasives, polishes, alcohol, etc.). Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning flu- ids. Wipe over the surfaces gently. Be careful that you do not scratch the surfaces. DANGER! Do not use any liquid cleaning agents Do not use any liquid cleaning agents for cleaning the lens, to avoid damaging the coa- ting film on the lens. Service 23 1 Switch the device off using the on/off switch on the Troubleshooting side. 2 Wait at least ten seconds. Power Cycling 3 Switch the device on using the on/off switch on the If a problem occurs that cannot be corrected with the side. instructions in this user manual (see also the help 4 If the problem repeats, please contact our technical below), follow the steps given here. customer service or your retailer. Problems Solutions The Pocket Projector cannot be switched on • Connect the supplied power supply to recharge the internal battery. No sound • Adjust the volume using the O / N key on the remote control. No sound from the external connected device • Check the cables to the external device • Set the volume on the external device • Only the original cables from the device manufacturer may function Bad sound quality with your computer connection • Check if the audio cable is connected to the computers headphone socket or the line-out socket. • The volume setting on the computer should not be too high. Only the initial screen appears and not the image from the external device • Check if the cables are connected to the right sockets. • Please check that the external device is switched on • Check if the video output of the external device is switched on. Only the initial screen appears and not the image from • Please check that the VGA-output of the computer the connected computer is switched on. • Check if the resolution of the computer is set to 800x600. Device switches to stand-by mode • When the device is running for a long period of time, the surface becomes hot and a warning symbol appears on the projection. The device switches automatically to stand-by mode when it gets too hot. After the device has cooled down, you can continue playback by pressing any key. • When the battery does not have sufficient capacity, the device switches to stand-by mode. Connect the device to the power supply. Philips · PPX2450 · 2480 9 Appendix Technical Data Dimensions (L¦.¦H¦.¦W) ....................... 105¦.¦31¦.¦105¦mm Weight .......................................................................... 0,27¦kg Recommended Ambient ........................................5¦–¦35¦.C Relative Humidity ..................20¦–¦80¦% (non-condensing) File format ................................ *.mp4, *.avi, *.mov, *.mkv, ..................................... *.dat, *.mpg, *.mpeg, *.vob, *.ts .......................... *.m2ts, *.rm, *.rmvb, *.asf, *.flv, *.3gp Photo formats .......................JPEG, BMP, PNG, GIF, TIFF Music formats .................MP3, WAV, WMA, OGG,AAC Video Standard (CVBS).......... PAL, SECAM, NTSC, HD Video Standard (YPbPr) .... 480i/p, 576i/p, 720p, 1080i/p Video connection ................................. Mini-HDMI socket Headphone connection........... Mono - jack plug: 3,5¦mm Audio Output ................................................................... 1¦W Internal memory .............................................................2¦GB Compatible Memory Cards ................... SD/SDHC/MMC Technology / Optical Display technology ..................................WVGA 0,3" DLP Light source ........................................................... RGB LED Resolution .......................................... 854¦x¦480¦Pixel¦(16:9) ...........................................................800¦x¦600¦Pixel¦(4:3) Supported Resolutions..................... VGA/SVGA/WVGA ..................................................................... XGA/WXGA Brightness (Bright Mode)..... up to 80 lumen (PPX2480) ............................................. up to 55 lumen (PPX2450) Contrast ratio ............................................................. 1000:1 Projected image size ........................................ 12¦–120¦inch Screen distance ........................................... 0,5¦m up to 5¦m Horizontal Scan Rate .........................................31¦–¦69¦kHz Vertical Scan Rate ................................................ 56¦–¦85¦Hz Power supply Model No. ............................................................... MPA-630 Manufacturer ............................. Wanlida Group Co., Ltd. Built-in rechargeable battery Battery type ........