Votes - 2, Average rating: 3.5
(
)
)
|
manual abstract
. menu About the memory of the settings The settings are automatically stored in the projector memory. If no signal is input If there is no input signal, “Cannot adjust this item.” appears on the screen. About unadjustable items Items that cannot be adjusted depending on the input signal are not displayed in the menu. For details, see page 39. 28 Using the MENU The PICTURE SETTING Menu The PICTURE SETTING menu is used for adjusting the picture or volume. Picture Mode Standard Adjust Picture... Volume: 30 PICTURE SETTING Input A PICTURE SETTING Contrast: 80 Brightness: 50 Color: 50 Hue: 50 Sharpness: Middle Black Level Adj.: Off Gamma Mode: Graphics Color Temp.: Low Video ADJUST PICTURE Standard Setting items Functions Initial setting value Picture Mode Selects the picture mode. • Dynamic: Emphasizes the contrast to produce a “dynamic” picture. • Standard: Normally select this setting. If the picture has roughness with the “Dynamic” setting, this setting reduces the roughness. The following picture mode can be used for VPL-ES2 only. • Game: Select for viewing game picture. • Living: Select for viewing sports, music, digital video camera picture. • Cinema: Select for viewing film-like picture. • Presentation: Select for viewing presentation files according to an input signal Volume Adjusts the volume. 30 Adjust Picture... The unit can store the setting values of the following sub menu items for each “Dynamic,” “Standard” or “Game,” “Living,” “Cinema,” “Presentation” (VPL-ES2 only) picture mode separately. Contrast Adjusts the picture contrast. according to an input signal Brightness Adjusts the picture brightness. according to an input signal Color Adjusts color intensity. according to an input signal Hue Adjusts color tones. The higher the setting, the picture becomes greenish. The lower the setting, the picture becomes purplish. 50 Sharpness Selects the picture sharpness from among “High,” “Middle” and “Low.” The “High” setting makes the picture sharp; the “Low” setting makes it soft. according to an input signal Adjustments and Settings Using the Menu The PICTURE SETTING Menu 29 Setting items Functions Initial setting value Black Level Adj. (VPL-ES2 only) Using black level adjustment results in a vivid image with clearly defined light and dark areas. Set the black compensation in accordance with the image source. High: Strong balck compensation Low: Weak black compensation Off: No black compensation according to an input signal Gamma Mode Selects a gamma correction curve. • Graphics: Improves the reproduction of halftones. Photos can be reproduced in natural tones. • Text: Contrasts black and white. Suitable for images that contain lots of text. Graphics Color Temp. Adjusts the color temperature. • High: Makes the white color bluish. • Low: Makes the white color reddish. according to an input signal The PICTURE SETTING Menu The INPUT SETTING Menu The INPUT SETTING menu is used to adjust the input signal. Wide Mode: Off Adjust Signal... Scan Converter: On INPUT SETTING Video SIGNAL SETTING Dot Phase: 24 H Size: 1504 Shift: H: 181 V: 34 INPUT SETTING Input-A Setting items Functions Initial setting value Wide Mode Sets the aspect ratio of the picture. according to a • Off: When the picture with ratio 4:3 is input. picture mode • On: When the picture with ratio 16:9 (squeezed) is input from equipment such as a DVD player. Adjust Signal... Dot Phase Adjusts the dot phase of the LCD panel and the according to an input signal output from a computer. signal Adjust the picture further for finer picture after the picture is adjusted by pressing the APA key. H Size Adjusts the horizontal size of picture output according to an input from a connector. Adjust the setting according signal to the dots of the input signal. For details, see page 50. Shift Adjusts the position of the picture. H adjusts the according to an input horizontal position of the picture.V adjusts the signal vertical position of the picture. As the setting for H increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. As the setting for V increases, the picture moves up, and as the setting decreases, the picture moves down. Use the b or the B key to adjust the horizontal position and the v and V key for the vertical position. Scan Converter Converts the signal to display the picture On according to the screen size. When set to “Off,” displays the picture while matching one pixel of input picture element to that of the LCD. The picture will be clear but the picture size will be smaller. Adjustments and Settings Using the Menu The INPUT SETTING Menu 31 Notes Notes • When SVGA or XGA signal is input, “Scan Converter” will not be displayed. • Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the wide mode may constitute an infringement of the rights of authors or producers, which are legally protected. About the Preset Memory No. This projecto...
Other models in this manual:Projectors - VPL-CS7 (914.17 kb)