Votes - 0, Average rating: 0
(
)
)
|
manual abstract
2 Press the I / 1 key. The ON/STANDBY indicator lights in green. 3 Turn on the equipment connected to the projector. 4 Press the INPUT key to select the input source. To input from Press INPUT to display Computer connected to the INPUT A connector INPUT A Computer connected to the INPUT B connector INPUT B Computer connected to the INPUT C (digital) connector INPUT C Computer connected to the INPUT D connector INPUT D Video equipment connected to the VIDEO input connector VIDEO GB 24 Projecting To input from Press INPUT to display Video equipment connected to the S VIDEO input connector S VIDEO Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly. Notes • If “Auto Input Search” is set to “On”, the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found. For details, see “Auto Input Search” in the SET SETTING menu on page 35. • The smart APA is effective for the input signal from a computer only. When the projector is connected to a notebook or a computer with a built-in LCD screen, you may have to switch the computer to output to the projector by pressing Fn key and Fx key (such as VGA .) LCD / F7 Fx Fn or 5 Turn the zoom ring to adjust the size of the picture. 6 Turn the focus ring to adjust the focus. Attention Looking into the lens when projecting may cause injury to your eyes. To adjust the volume The volume can be adjusted in the on-screen menu. See “Volume” in the PICTURE SETTING menu on page 33. To mute the picture Press the PIC MUTING key on the Remote Commander. Press again to restore the picture. Setting Up and Projecting 25 25 GB Projecting To control the computer using the supplied Remote Commander When you connect an IBM PC/AT compatible to the projector by using the USB cable, you can control the mouse of the computer using the Remote Commander. The R/L CLICK keys and joystick function as follows. Note Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Key and joystick Function R CLICK (front) Right button L CLICK (rear) Left button Joystick Corresponds with the movements of the mouse To get the clearest picture You can adjust picture quality when projecting a signal from the computer. 1 Project a still picture from the computer. 2 Press the APA key. “Complete!” appears on the screen when the picture is adjusted properly. Notes • Press the APA key when the full image is displayed on the screen. If the projected image includes a large black area around the periphery, the APA function will not function properly and in some cases, portions of the image may not be displayed. • When you switch the input signal or re-connect a computer, press the APA key again to adjust the picture again. • You can cancel the adjustment by pressing the APA key again while “ADJUSTING” appears on the screen. • The picture may not be adjusted properly depending on the kinds of input signals. • Adjust the items in the INPUT SETTING menu when you adjust the picture manually. Using the security lock 1 Press the MENU key and then, in the INSTALL SETTING menu, turn on the security lock setting. 2 Enter the password. Use the MENU, M/m/Other models in this manual:
Projectors - VPL-PX40 (2.56 mb)