Votes - 2, Average rating: 4.5 ( )

Manafacture: Toshiba File size: 2.86 mb File name: Language of manual:

Other manuals for this model:

Projectors - Conference Room Projectors TDP-T250U (136.36 kb)

• If you use this function on commercial video software, broadcast or cable- broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. ¦ SPLIT function setting Pressing the MENU button while two screens are displayed displays the SPLIT menu. This menu sets up both screens. To hide the menu, press the RETURN button. Item Description Size Sets size of both screens. Sub input Selects the input source for the sub screen. When the main screen is input from computer or Y/PB/PR: Press or , toggle the input with and fix selection with . Video/S-video When the main screen is input from video or S-video: Press or , toggle the input with and fix selection with . Computer (1) (digital) / Y/PB/PR (1) (digital) / Computer (1) (analog) / Y/PB/PR (1) (analog) / Computer (2) / Y/PB/PR (2) / Computer (3) / Y/PB/PR (3) Note •To enlarge the screen fully, select [ Full] for [ Size]. 35 Operations Using ¦ Screen combination Group Input signal A Computer (1) (digital) / Y/PB/PR (1) (digital) Computer (1) (analog) / Y/PB/PR (1) (analog) Computer (2) / Y/PB/PR (2) Computer (3) / Y/PB/PR (3) B Video S-video For PIP function A: Parent screen, B: Child screen A: Child screen, B: Parent screen You cannot display two screens of the same group in the PIP mode. For SPLIT function A, B or B, A is available. You cannot display two screens of the same group in the SPLIT mode. ¦ Password Function When the password function is added and [ Password] is set to [ On], image projection requires an entry of the preset password at power-on. To add the password function, perform the following procedure: (The password function, once added, cannot be deleted. Set [Password] to [Off] if you do not want to use it after addition.) 1 Set the projector to the operating status or the standby mode. 2 Keep pressing the button for about 10 seconds until a beep sounds. The password function is added when the steps up to here have been completed. It is also added to the Default setting menu. 36 How to set password ) 1 Select [Password] or button. The password setting confirmation screen is displayed. ([OK] or [Cancel]) 2 Select [OK] and press the button. The password entry screen is displayed. 3 Enter a four-digit number for the remote control. The input number appears as [****]. 4 Re-enter the same password for confirmation. When the password is confirmed, the setting is complete and the password becomes [On] . If the password is wrong, repeat the procedure from step 2. How to operate when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of the remote control. If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong, a message appears to prompt you to re-enter the password. If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode. How to cancel password (from [On] to [Off] ) 1 Select [Password] in the Default setting menu and press the or button. The password entry screen is displayed. 2 Enter the password using numeric keys of the remote control. 3 The password cancel confirmation screen is displayed. ([OK] or [Cancel]) 4 Select [OK] and press the button. The [Password] is canceled and becomes [Off]. Note • The password entry screen appears when the power is turned back on only after the main power switch is turned off or the power cord is unplugged. If you forgot the password, please inquire your dealer. 37 Operations Using menus You can call up and conduct a of adjustments the operation buttons p.16 on the control panel ¦ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button Display the Setting display menu 2. Select a Category Image adjustment Contrast Brightness Picture mode R-leve G-leve B-leve Auto setting Phase Frequency H-position V-position Clamp 1 Clamp 2 +12 +12 Bright +12 +12 +12 +12 +12 +12 +12 +12 +12 To image adjustment menu 3. Adjustments & Settings Select a category by using . There are following five categories: Displays the current adjustments and settings of selected category. Item shown with gray cannot be adjusted with the current input source. p.38Image adjustment menu p.40Display setting menu Default setting menu p.42 Control setting menu p.44 Status display menu p.46 Press or to open the menu. Execute +16 +16 +16 +16 +64 +64 +32 255 255 30 Standard Brightness +12 English French German Italian Spanish Po r tuguese Russian Swedish Tu r kish Polish Japanese Simplitied Tr aditional Korean The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference. Item Adjustment/Setting Value These marks signify the items can be adjusted/set by using . Toggle items wi...

Download now

Please, enter two numbers from picture: