|
Photos and specs Samsung SP-P310ME |
Other manuals for this model:
manual abstract
Do not look directly at the lens while connecting the battery. 2. Removing the Battery Hold the back of the projector and lift it up while sliding the latch on the back of the battery to the left ( ). 3. Battery Use Time ..Operating time : Up to 2.5 hours when fully charged • Charge time : About 3 hours when charging separately from the projector 4. Charging the Battery Charging the battery when the battery is separated from the projector. • Adapter Standard : DC 14 V, 3.5 A Charging the battery when the battery is installed under the projector. 5. Battery Use Instructions Please follow the instructions below when using the battery. Use only a designated battery. Using a non-designated battery may damage the projector. Avoid heat or impact to the battery. Avoid strong force/impact to the battery, such as dropping or throwing the battery. Avoid exposing the battery to high temperatures such as a sauna. This may generate heat or cause fire or the battery to explode. If the battery generates heat or fire, is damaged or deformed, immediately remove the battery from the projector, and isolate the battery in a safe location as it may generate heat or cause fire or explosion. Contact a nearby service center. Do not apply strong pressure to the battery, or do not impact the battery with a sharp object. Do not press the battery hard when it is in a bag or do not punch or impact the battery with a sharp object such as gimlet, nail or tack. It may damage the battery or generate heat, cause fire, or explosion. When not using the battery over a long period. Leaving the projector with the battery installed over a long period may cause discharge of the battery or malfunction even if the power has turned off. Remove the battery from the projector when not using it over a long period. When using the rechargeable battery for the first time or after a long period of not being used, charge the battery fully first. Turn the power off first. Do not remove the battery when the power is on as it may damage the projector. Use only an authorized adapter. If an unauthorized adaptor is used, the projector battery may become damaged or explode. Do not look directly at the lens when installing the battery. When the battery is connected to the projector, the screen is automatically turned on. Looking directly at the lamp light may cause damage to your eyesight. Avoid contact between the battery charging terminals and metal objects such as necklaces, coins, keys, etc. This may cause fire or explosion. Do not place the battery in air-tight locations with high temperatures such as inside a vehicle exposed to the direct ray of light. Keep the battery indoors (0°C ~ +40°C / 32°F ~ +104°F). This may cause external deformation or explosion. Keep the battery out of children's reach or pets to prevent them from putting the battery in their mouth. If the battery is flooded or damaged, it may explode. This may cause fire. Coming into contact with a damaged battery (also orally) may affect the human body. If the battery is broken and the battery fluid comes into contact with your skin, wash the fluid off with flowing water for 1 or 2 minutes so that the fluid is completely washed off. | Product Features | Product Views | Battery (sold separately) | Product Specifications | The external design and product specifications may change without prior notice due to improvements to the product performance. Product Specifications Model SP-P310ME Panel Size 13.97 mm (0.55 inch) Resolution 800 x 600 (SVGA) Light Source LED Power Power Consumption Less than 30 W (without Battery) Standard Voltage DC 14 V, 3.5 A Dimension 127.2 mm x 94.5 mm x 50.8 mm (5 inchesx 3.7 inchesx 2 inches) Weight 700 g (1.54 lb) Major Functions Brightness 50 ANSI lm Contrast 1000:1 Screen Size Diagonal 15" ~ 60" Projection Distance 0.5~2.8 m Keystone Vertical Input/Output (24Pin) PC 1) Connector Type : 15Pin D-Sub 2) Frequency (Refer to the Supported Display Modes.) Composite Supported Broadcast Signals : NTSC, PAL, SECAM (PAL-60 is not supported.) Operating Environment Temperature and Humidity Operating temperature (0°C~40°C / 32°F~104°F), Humidity (10~80%) Storage temperature (-20°C~45°C / -4°F~113°F), Humidity (5~95%) EMI Class B Noise Maximum 25 dB (by Samsung Reference) This Class B equipment is designed for home and office use. The equipment has been registered regarding EMI for residential use. It may be used in all areas. Class A is for office use. Class A is for business while class B emits less electromagnetic waves than class A. Supported Display Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Clock Frequency (MHz) Polarity (Horizontal /Vertical) VGA, 640 x 350 31.469 70.086 25.175 +/- VGA, 640 x 350 37.861 85.080 31.500 +/- VGA, 640 X 400 37.861 85.080 31.500 -/+ VGA, 640 x 480 31.469 59.940 25.175 -/- VGA, 640 x 480 31.469 59.940 25.175 -/- VGA, 640 x 480 37.500 75.000 31.500 -/- VGA, 640 x 480 43.269 85.008 36.000 -/- VGA, 640 x 480 35.000 66.667 30.240 ...