Votes - 4, Average rating: 3.8 ( )

Manafacture: Samsung File size: 1.47 mb File name: Language of manual:

Other manuals for this model:

Projectors - SP-M221 (1.42 mb)

Projectors - SP-M221 (1.63 mb)

Projectors - SP-M221 (1.4 mb)

AV Timing (VIDEO) NTSC, NTSC 4.43, PAL, PAL60, PAL-N, PAL-M, SECAM Your projector supports the standard video formats listed above through its video inputs. No adjustments are necessary. Installation and Connection 2-8 2-9 Connecting the Power 1. Plug the power cord into the power terminal on the rear side of the projector. 2-9 Installation and Connection 2-10 Connecting with a PC and Setting up the PC 2-10-1. Setting up the PC Environment Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Windows desktop, and then click [Properties]. The dialog appears. 2. Click the [Settings] tab, and then set the setup. 3. Press the [Advanced] button. Another property window appears. 4. Click the [Monitor] tab and set the . For the refresh rate that matches the resolution you've chosen, see the refresh rate (60 Hz, 70 Hz, etc.) next to your selected resolution in the PC Timing Display Mode table in section 2-8. Installation and Connection 2-10 □ Setting the refresh rate sets both the vertical and horizontal frequencies. 5. Click the [OK] button to close the window, and then click the [OK] button on the window to close that window. 6. Shut down the PC and connect it to the projector. E3 The setup process might vary depending on your type of computer or version of Windows. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) This projector supports 32 bit color quality (per pixel) when it is used as a PC monitor. Projected images may differ from the images on your monitor depending on the monitor manufacturer or Windows version. When connecting the projector to a PC, make sure that the PC setup complies with the display settings supported by this projector. If it does not, you may have signal problems. 2-10 Installation and Connection 2-10-2. Connecting with a PC •M- © iSs# • Make sure that your PC and projector are turned off. 1. Connect the [PC IN] port on the rear side of the projector to the PC video out (D-sub) port of the PC using a PC video cable. 2. Plug in the power cords of the projector and the PC. E9 This product supports plug and play. If you use Windows XP, you do not need to set up the driver on your PC. Using the Projector 1. Turn on the projector, and then press the [SOURCE] button to select . If the Mode is not available, make sure the PC video cable is properly connected. 2. Turn on the PC, and then set the PC Environment (screen resolution, etc.) if necessary. 3. Adjust the screen. Installation and Connection 2-10 2-10-3. Connecting Video Devices (Monitor, TV, etc.) (SP-M270, SP-M300 Models Only) ^j You can view an image on both your projector and a separate monitor at the same time. Make sure that your PC and projector are turned off. 1. Connect the [PC IN] terminal at the back of the projector to the D-Sub (PC, VGA) terminal of your PC using a D-Sub cable. 2. Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable. - When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [PC IN] terminal. - The video on the monitor connected to the [PC OUT] terminal will be normal even if your projector displays a blank screen. - The [PC OUT] function will not operate in standby mode. 2-10 Installation and Connection 2-11 Connecting a PC using an HDMI/DVI cable 2-11-1. Connecting a PC using an HDMI/DVI cable Make sure that your PC and projector are turned off. 1. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied). - If you are connecting to the HDMI terminal of your PC, use an HDMI/HDMI cable (Not supplied). - For the supported resolutions and refresh rates, see PC Timing (D-Sub/HDMI) in Section 2-8, "Supported Display Modes". 2-11-2. Configuring the Audio Settings for Your PC When the projector is connected to the PC via an HDMI cable, you can change the audio settings as follows: 1. In Category View of Windows XP : Go to Control Panel - [Sounds, Speech and Audio Devices], and select . B Sounds, Speech, and Audio Devices f* E0t v*w Fiver«« Took o M * t* 4 P*“* . . ***** ’ ' I® PoWefSrne Address 3 Scuxh, SpCCtfl ird Aubo Oewtw - / ,0 ^ Sound«, Speech, and Audio Device« ^ AccessMty Sarri Op twos Q Atf.-«need vokm ContrcH TrtMiMrUtoolm O Sound Q 0\0 Pick a task... Adjust tlw tyitrm volume CtunQr the tound Miiitiw Clunqr Htr spcakf* wttWwjt or pick a Control Panel icon RfrfUrk HO Sound K«o*ger ^ Sound* ind Auda Of«« Installation and Connection 2-11 In Classic View of Windows...

Download now

Please, enter two numbers from picture: