Votes - 3, Average rating: 5
(
)
)
|
Other manuals for this model:
manual abstract
continually, contact your product distributor or service center. Disconnect and reconnect the power cord and start the projector When the DDP IC or color wheel Action 4 again. If the same symptom still occurs, contact your product fails to operate. distributor or service center. The lamp is malfunctioning after Turn the power off, wait for a sufficient amount of cooling time and Action 5 abnormal power off or then turn the power on for operations. If the same problem occurs restarting right after continually, contact your product distributor or service center. turning off the projector. Check the lamp usage time on the Information Display screen. If you When the screen becomes Action 6 need to replace the lamp, contact your product distributor or service darker center. This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise, which does not affect the product performance. No exchange or refund for the noise concern. Rear Side 1. PC IN Input port 5. RS-232C port (For service input terminals) 2. COMPONENT IN Input port 6. VIDEO IN Input port 3. S-VIDEO IN Input port 7. Remote Control Signal Receiver 4. POWER Input port 8. HDMI IN 2, HDMI 1/DVI IN Input port | Product Features | Product Views | Remote Control | Product Specifications | 1. ON ( ) Button 2. COMP1 Button 3. VIDEO Button 4. S-VIDEO Button 5. PC Button 6. MENU Button 7. Move (^ Ў . .)/ENTER Button 8. INFO Button 9. P.SIZE Button 10. STILL Button 11. P.MODE Button 12. OFF ( ) Button 13. LIGHT ( ) Button 14. HDMI1 Button 15. HDMI2 Button 16. COMP2 Button 17. RETURN Button 18. EXIT Button 19. D.BLACK Button 20. USER Button 21. INSTALL Button 1.ON( ) Used to turn on the projector. 2. COMP1 Used to switch to COMPONENT 1 Mode. 3. VIDEO Used to switch to Video Mode. 4. S-VIDEO Used to switch to S-VIDEO Mode. 5. PC Used to switch to PC Mode. 6. MENU Used to display Menu Screen. 7. Move(^ Ў . .)/ENTER Used to move to or select each menu item. 8. INFO Used to check source signals, picture setup, PC screen adjustment and lamp lifespan. 9. P.SIZE Used to adjust the size of picture screen. ) 10. STILL Used to see still images. 11. P.MODE Used to select Picture Mode. 12.OFF ( ) Used to turn off the projector. 13. LIGHT ( Used to operate remote control in dark room. 14. HDMI1 Used to switch to HDMI 1 Mode. 15. HDMI2 Used to switch to HDMI 2 Mode. 16. COMP2 Used to switch to COMPONENT 2 Mode. 17. RETURN Returns to the previous menu. 18. EXIT Used to make Menu Screen disappear. 19. D.BLACK Alter the screen brightness and contrast by adjusting the iris in the optical system. 20. USER Used to select Picture User Adjust Mode. 21. INSTALL Used to flip or reverse the projected image. | Product Features | Product Views | Remote Control | Product Specifications | Design and specifications of the product may be modified without prior notice for better performance. Specifications Model SP-A800B Size 24.1 mm / 0.9 inch Panel Resolution 1920 x 1080 Manufacturer Texas Instrument Type 300 W UHP Lamp Life Time 2000 Hrs Manufacturer Philips Color 62.2 M (1920 x 1080 x 3 x 10 bit) Optimum 1920 x 1080 @ 60 Hz resolution Resolution Maximum 1920 x 1200 resolution Input video signal Video, S-Video, Component, Analog PC, HDMI Input synchronization signal Seperate H/V sync, TTL Maximum Pixel Clock 162 MHz Diagonal screen size 1016 mm ~ 7620 mm (16:9, Diagonal) Projection Range 1.5 m ~ 14 m Power Less than 410 W Consumption Power Voltage 110/220 Vac +/-10 %, 50/60 Hz +/-3 Hz Noise Theater : 24dB, Bright : 30dB 431.3 mm(W) x 468.5 mm(D) x 198.8 mm(H) Dimensions 17.0 inch(W) x 18.4 inch(D) x 7.8 inch(H) Weight 9.8 Kg / 21.6 lb Brightness 1,000 ANSI Key Features Contrast 10000:1 (Full On / Off) Keystone Vertical Temperature 50 °F ~ 104 °F (10 °C ~ 40 °C), Operating Humidity (10 % ~ 80 %) User Temperature Environment and Humidity Temperature -4 °F ~ 113 °F (-20 °C ~ 45 °C) , Storage Humidity (5 % ~ 95 %) This Class B equipment is designed for home and office use. The equipment has been registered regarding EMI for residential use. It may be used in all areas. Class A is for office use. Class A is for business while class B emits less electromagnetic waves than class A. The DMD Panel used in DLP Projectors consists of several hundred thousand micro mirrors. As with other visual display elements, the DMD Panel may include a few bad pixels. Samsung and the DMD Panel manufacturer have a rigid, bad pixel identification and limitation procedure in place and products will not exceed the maximum number of bad pixels set by our standards. Rarely, non-displayable pixels may exist, however it does not affect the picture quality nor the lifespan of the product. Supported Display Mode Horizontal Sync Vertical Sync Pixel Resolution Total Input Source Frequency Frequency Frequency Sync Type (HxV) Resolution polarity polarity [kHz] [Hz] [MHz] PC, DVI 800x449 31.5 P 70.1 N 25.2 Sep. 640x350 832x445 37.9 P 85.1 N 31.5 Sep. PC 640x400 832x445 37.9...