Votes - 3, Average rating: 3.7
(
)
)
|
Photos and specs BenQ MP512 ST |
manual abstract
8 Projector exterior view.......................... 9 Controls and functions ....................... 10 Positioning your projector............................13 Choosing a location............................. 13 Obtaining a preferred projected image size ............................................. 14 Connection .......................17 Connecting a computer or monitor... 17 Connecting Video source devices....... 19 Operation ..........................24 Starting up the projector..................... 24 Using the menus.................................. 25 Utilizing the password function ......... 26 Switching input signal......................... 28 Adjusting the projected image............ 29 Magnifying and searching for details ................................................... 30 Selecting the aspect ratio..................... 31 Optimizing the image.......................... 32 Setting the presentation timer ............ 36 Hiding the image ................................. 37 Locking control keys ........................... 38 Freezing the image............................... 38 Utilizing FAQ function ....................... 38 Operating in a high altitude environment.........................................39 Adjusting the sound.............................39 Personalizing the projector menu display ........................................40 Shutting down the projector ...............40 Menu operation ...................................41 Maintenance......................49 Care of the projector............................49 Lamp information................................50 Troubleshooting ...............56 Specifications ....................57 Projector specifications........................57 Dimensions...........................................58 Timing chart.........................................58 Warranty and Copyright information.......................61 Regulation statements .........................62 Table of contents Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you operate your projector. Save it for future reference. 2. Do not look straight at the projector lens during operation. The intense light beam may damage your eyes. 3. Refer servicing to qualified service personnel. 4. Always open the lens shutter or remove the lens cap when the projector lamp is on. 5. In some countries, the line voltage is NOT stable. This projector is designed to operate safely within a mains voltage between 100 to 240 volts AC, but could fail if power cuts or surges of ±10 volts occur. In areas where the mains voltage may fluctuate or cut out, it is recommended that you connect your projector through a power stabilizer, surge protector or uninterruptible power supply (UPS). 6. Do not block the projection lens with any objects when the projector is under operation as this could cause the objects to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press BLANK on the projector or remote control. Important safety instructions Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. 8. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause them to break on rare occasions. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 10. Do not place this product on an unstable cart, stand, or table. The product may fall, sustaining serious damage. 11. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may cause death if you should come into contact with live parts. The only user serviceable part is the lamp which has its own removable cover. Under no circumstances should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 12. When the projector is under operation, you may sense some heated air and odor from its ventilation grill. It is a normal phenomenon and not a product defect. Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. 8. Do not operate lamps beyond the rated lamp life. Excessive operation of lamps beyond the rated life could cause them to break on rare occasions. 9. Never replace the lamp assembly or any electronic components unless the projector is unplugged. 10. Do not place this product on an unstable cart, stand, or table. The product may fall, sustaining serious damage. 11. Do not attempt to ...