Votes - 0, Average rating: 0
(
)
)
|
manual abstract
P006-041_ES8163_62_61_EU 05.2.21 11:17 ページ 8
Using your shaver
Applying excessive pressure does
Cleaning your shaver
out the system outer foil.
not provide a closer shave.
(see fig. 7)
It is recommended to clean your
Caution – The system outer foil is
shaver with the “sonic” vibration
Pivot action selector
very thin and can be damaged if
Warning – To prevent electric
cleaning when the tap symbol (a)
(see fig. 4)
handled improperly. Before each
shock or personal injury, discon-
appears in LCD (ES8163).
Use the pivot action selector to
use, always check the foil for dam-
nect the power cord from the
choose the shaving mode, “soft”
age. To avoid personal injury, do
shaver before cleaning with water.
Brush cleaning
(soft) and “lock” (lock) based on your
not use if the foil or other parts of
Squeeze the foil frame release but-
shaving preference.
For cleanliness and convenience, we
the shaving head is damaged.
tons and lift the foil frame upward to
The pivot action can be changed
recommend that you clean your
remove it (see fig. 9). Remove the
Disconnect the power cord from the
whether the switch is turned on or off.
shaver with water and a liquid hand
inner blades one at a time by grasp-
shaver, and push the On/Off switch
System outer foil
soap. Regular cleaning will keep your
ing it firmly at both ends and pulling
to turn the shaver on.
(see fig. 5)
shaver in good condition while pre-
it straight away from the shaver.
System outer foil has a slit blade (a)
venting odors or bacteria from devel-
Clean the outer foils, the shaver body
If you push and hold the On/Off
between 2 foils (b). They move up
oping, and maintain the cutting per-
and the trimmer with the long brush
switch for more than 2 seconds, it
and down independently to follow the
formance.
(see fig. 10). Clean the inner blades
will activate the turbo mode for
contours of your face.
With the system outer foil in place,
with the short brush by moving it in
“sonic” vibration cleaning.
The slit blade catches and cuts
apply some hand soap onto the outer
the direction in fig. 11 (A). Do not
(see “Cleaning your shaver”)
longer and lying hairs easily.
foil.
move the brush in the direction in fig.
Caution:
Push and hold the On/Off switch
11 (B), as it will damage the inner
Shaving with “sonic” vibration may
For wet shaving
more than 2 seconds to activate the
blade, and its cutting performance.
damage your skin. Please turn it
Put a thin layer of shaving foam on
turbo mode for “sonic” vibration
Do not use the short brush to clean
off and on again to deactivate the
your face which works as a lubrica-
cleaning.
the outer foils.
turbo mode.
tor. Shaving foam is the most suit-
At the same time, the “sonic” clean-
able among many other shaving aids
ing symbol appears in the LCD dis-
Replacing shaving head
Do not place fingers on the On/Off
(gel, soap, cream, etc.). Do not put a
play (ES8163), or the lamps of the
components
switch during use.
thick layer of shaving foam as it may
Battery capacity monitor (ES8162),
This may cause the shaver to stop
affect shaver’s performance. If the
or Low battery indicator/Charge sta-
It is recommended that you replace
during use or change it to the
shaving head is clogged with foam,
tus lamp (ES8161) will flash around
the system outer foil at least once a
“sonic” vibration cleaning mode.
simply rinse it under running water.
randomly.
year and the inner blade at least once
Place your finger on the finger rest
Pour some water over the outer foil.
every 2 years to maintain your shav-
during use.
Using the trimmer
After about 20 seconds, it will be
er’s cutting performance.
(see fig. 6)
automatically turned off, or you can
Replacing the system outer foil
Hold the shaver at a right angle (90°)
Slide the trimmer handle up to open
turn it off by pushing the On/Off
(see fig. 8)
to your skin (see fig. 3). Start out
the trimmer.
switch.
Squeeze the system outer foil re-
shaving by applying gentle pressure
Place the trimmer at a right angle to
Remove the system outer foil and
lease buttons and lift the system
to your face. Stretch your skin with
your skin and move it downward to
push the On/Off switch more than 2
outer foil upward to remove it. To in-
your free hand and move the shaver
trim sideburns.
seconds to activate the turbo mode
sert the new system outer foil, press
back and forth in the direction of your
for “sonic” vibration cleaning and
down until it snaps into place.
beard. You may gently increase the
clean it with running water.
amount of pressure as your skin be-
Wipe off any moisture from the
comes accustomed to this shaver.
shaver with a dry cloth and dry it with-
8
10
9
9
...Other models in this manual:
Home Care Products - ES8162 (754.95 kb)
Home Care Products - ES8163 (754.95 kb)