Votes - 0, Average rating: 0 ( )

Manafacture: Philips File size: 1.17 mb File name: Language of manual:

Before first use 1 Place the appliance at 0-50cm from your head, for example on a bedside table (Fig. 7). Put the plug in the wall socket. The hour indication on the display starts flashing to indicate that you have to set the clock , time (Fig. 8). setting the clock 1 Turn the middle selection wheel (SET) up and/or down to select the hour. Note:You can only do this when you are in the set clock menu and when the hour indication flashes. If this is not the case, press the middle selection wheel (SET) two times.You are now in the set clock menu. Press the middle selection wheel (SET) to confirm. The minute indication starts flashing (Fig. 9). , Turn the middle selection wheel (SET) up and/or down to select the minutes. Press the middle selection wheel (SET) to confirm. The appliance leaves the menu and the display shows the set clock time. , The appliance is now ready for use. Note: Every time you remove the plug from the wall socket for more than 15 minutes, you have to set the clock time again in the way described above.To change the set clock time when the plug is still in the wall socket, see section ‘Menu functions of middle selection wheel (SET)’ in chapter ‘Using the appliance’. using the appliance using the lamp You can use the appliance as a bedside lamp. 1 To switch on the lamp, press the top selection wheel (1).Then turn it to select the light intensity level you prefer ( ). (Fig. 10) You can choose a light intensity between 1 and 20. Note: It takes approx. 1 second for the lamp to go on.This is normal, the lamp needs to heat up. Note:The light intensity you have selected is automatically set as the light intensity level for the alarm as well. Tip:When you use the appliance for the first time, set the light intensity to 20.The moment you wake up, check which light intensity level the appliance has reached by slightly turning the top selection wheel. When you do this, the current alarm light intensity level appears on the display. Set the alarm light intensity to this level for the next day. To switch off the lamp, press the selection wheel again. EnglisH menu functions of middle selection wheel (sEt) Below you find a description of all functions that can be set in the menu. These functions appear in the menu in the following order : -Clock time -Alarm time -Alarm sound -Sleep timer You can use the sleep timer when you want the radio and/or lamp to stay on for a set period of time (15 minutes to 2 hours) before you go to sleep.You can switch off the sleep timer again by setting the sleep timer period to 00:00 or by switching off the radio and/or lamp. -Display brightness You can choose a display brightness between 1 and 4. You can operate the function selection wheels in the following way: 1 Press the middle selection wheel (SET) to enter the menu. Turn the middle selection wheel (SET) to select a function. Press the middle selection wheel (SET) to enter this function. Turn the middle selection wheel (SET) to select a setting. 5 Press the middle selection wheel (SET) to confirm. radio/volume 1 To switch on the radio, press the bottom selection wheel. (Fig. 11) To select the desired radio frequency, turn the middle selection wheel (SET) (Fig. 1 ). Tip:To scan radio frequencies automatically, press and hold the middle selection wheel (SET) for approx. 2 seconds. 1 To switch off the radio, press the bottom selection wheel again. volume To set the volume turn the bottom selection wheel to select the volume level you prefer. You can choose a volume level between 1 and 20. Note: The volume level you have selected is automatically set as the volume level for the alarm as well. setting the alarm When you set the alarm, you choose an alarm time and the type of sound you want to wake up to. The alarm is set when the alarm symbol is visible on the display.The light intensity slowly increases to the selected level during the last 30 minutes before the set alarm time. The sound slowly increases in 90 seconds to the selected level after the set alarm time. Note: You can set the light intensity or alarm volume by turning the top or bottom selection wheel respectively. If you do not want to wake up to the lamp or to a sound, select a light intensity or volume level of 0. See section ‘Using the lamp’ and ‘Radio/Volume’. Push the control lever down to the middle position to switch the alarm on. (Fig. 1 ) The hour indication flashes (Fig. 14). , To adjust the time, follow steps to 5. If the alarm time is correct, just wait for a few , seconds. Turn the middle selection wheel (SET) to select the hour. Note:You can only do this when the hour indication flashes. If this is not the case, push the control lever up and down again to enter the alarm time mode.You can also set the alarm time in the menu (see section ‘Menu functions of middle selection wheel (SET)’ above). 10 EnglisH Press the middle selection wheel (SET) to confirm. The minute indication starts to flash (Fig. 15). , 5 Turn the middle selection wheel (SET) to...

Download now

Please, enter two numbers from picture: