Votes - 0, Average rating: 0
(
)
)
|
manual abstract
according to the individual.
limited life. If the operation time be-
• Adjust the shoulder pad to the
comes extremely short after recharg-
shoulder.
ing, replace the battery pack with a
• Pull the shoulder strap to make
new one.
sure it is firmly attached to the main
unit of the tool.
Battery Recycling
[Battery Pack]
ATTENTION:
For environmental protection and
For Appropriate Use of
recycling of materials, be sure that
Battery pack
it is disposed of at an officially
assigned location, if there is one in
Li-ion Battery pack (EY9L40/EY9L41)
your country.
• For optimum battery life, store the Li-
ion battery pack following use without
[Battery Charger]
charging it.
Charging
• When charging the battery pack,
confirm that the terminals on the
Cautions for the Li-ion Battery
battery charger are free of foreign
substances such as dust and water
Pack
etc. Clean the terminals before
• If the temperature of the battery pack
charging the battery pack if any
falls approximately below −10°C (14°F),
foreign substances are found on the
charging will automatically stop to
terminals.
prevent degradation of the battery.
The life of the battery pack terminals
Common Cautions for the Li-
may be affected by foreign ion/Ni-MH/Ni-Cd Battery Pack
substances such as dust and water
etc. during operation.
•
The ambient temperature range is
between 0°C (32°F) and 40°C (104°F).
• When battery pack is not in use,
keep it away from other metal objects
If the battery pack is used when the
like: paper clips, coins, keys, nails,
battery temperature is below 0°C
screws, or other smal metal objects
(32°F), the tool may fail to function
that can make a connection from one
properly.
terminal to another.
•
Use the charger at temperatures
Shorting the battery terminals together
between 0°C and 40°C, and charge
may cause sparks, burns or a fire.
the battery at a temperature similar to
• When operating the battery pack,
that of the battery itself. (There should
make sure the work place is well
be no more than a 15°C difference
ventilated.
between the temperatures of the
battery and the charging location.)
• When the battery pack is removed
from the main body of the tool, replace
• When charging a cool battery pack
the battery pack cover immediately in
(below 0°C (32°F)) in a warm place,
order to prevent dust or dirt from
leave the battery pack at the place
contaminating the battery terminals
and wait for more than one hour to
and causing a short circuit.
warm up the battery to the level of
the ambient temperature.
• Cool down the charger when charging
more than two battery packs
consecutively.
• Do not insert your fingers into contact
Battery Pack Life
hole, when holding charger or any
The rechargeable batteries have a
other occasions.
- 9 -
...