Votes - 0, Average rating: 0
(
)
)
|
manual abstract
I. INTENDED USE
9) Do not cut oversized workpiece.
10) Check for the proper clearance
Thank you for purchasing the Pana-
beyond the workpiece before cut-
sonic Jigsaw. This jigsaw can be used
ting so that the blade will not
with Panasonic rechargeable batteries
strike the floor, workbench, etc.
to provide excellent cutting perform-
11) Hold the tool firmly.
ance. The jigsaw is for cutting metal,
12) Make sure the blade is not con-
wood, and drywall only.
tacting the workpiece before the
Read the “Safety Instructions” booklet
switch is turned on.
and the following before using.
13) Keep hands away from moving
parts.
II. ADDITIONAL
14) Do not touch the blade or work-
piece immediately after opera-
SAFETY RULES
tion; they may be extremely hot
1)
and could burn your skin.
Hold tool by insulated gripping
surfaces when performing an op-
15) Never swing tool.
eration where the cutting tool may
16) Do not use blades which are de-
contact hidden wiring. Contact with
formed or cracked.
a “live” wire will also make exposed
17) Do not use blades which do not
metal parts of the tool “live” and
comply with the characteristics
shock the operator.
specified in these instructions.
2) Use clamps or another practical
18) Remove the battery pack from the
way to secure and support the
tool body before replacement of
workpiece to a stable platform.
the blade, making adjustments,
Holding the work by hand or against
or other maintenance work.
your body leaves it unstable and
19) Wear ear protectors when using
may lead to loss of control.
the tool for extended periods.
3) Keep hands away from cutting
area and blade. Keep your insu-
lated gripping surfaces.
Symbol
Meaning
If both
hands are holding the tool, they
V Volts
cannot be cut by the blade.
4) Never hold piece being cut in
Direct current
your hands or across your leg. It
is important to support the work
n0
No load speed
properly to minimize body exposure
or loss of control.
…min-1
Revolutions or reciproca-
5) Be aware that this tool is always
tions per minutes
in an operating condition, since it
does not have to be plugged into
Ah
Electrical capacity of
an electrical outlet.
battery pack
6) Always use safety goggles or
To reduce the risk of
glasses with side shields. Ordi-
injury, user must read
nary eye or sun glasses are NOT
and understand instruc-
safety glasses.
tion manual.
7) When this tool is used for
woodworking in confined areas
For indoor use only.
(e.g. indoors), wear dust mask.
8) Avoid cutting nails. Inspect work-
piece for any nails and remove
them before operation.
- 6 -
...