Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
Other - ICP5045BL (30.84 kb)
Other - ICP5045BL (31.05 kb)
Other - ICP5045BL (213.11 kb)
manual abstract
In the case of conflict between various parts of the documentation set, this file contains the most current information. The following information is available in this file: I.) Important information - please read before using/installing ISM 1. General Cautions and Notes 1.1 Critical 1.2 Informational 2. Supported Controllers and Firmware Releases 3. Known Limitations 4. Supported Operating Systems 5. Contact Information II.) General Information 1. Software Versions and Documentation 1.1 ICP Storage Manager Version 1.2 Documentation on this CD 2. Installation and Setup Notes 2.1 Supported Operating Systems 2.2 Minimum System Requirements 2.3 General Setup Notes 2.4 Linux Setup Notes 2.5 VMware Setup Notes 3. General Cautions and Notes 3.1 General Cautions 3.2 General Notes 4. Operating System-Specific Issues and Notes 4.1 All 4.2 Windows - All 4.3 Windows 2000 4.4 Windows for EM-64T and AMD-64 4.5 Linux 5. Array Level-Specific Notes 5.1 RAID 1 and RAID 5 Notes 5.2 RAID 10 Notes 5.3 RAID x0 Notes 6. ARCCONF Notes 7. Other Issues and Notes -------------------------------------------------------------------- I.) Important information - please read before using/installing ISM 1. General Cautions and Notes 1.1 Critical - Use only one instance of ICP Storage Manager! Do NOT run multiple configuration tools in parallel! Doing so may cause unpredictable results. - Do not use/install parallel to Adaptec Storage Manager (ASM). Doing so may cause unpredictable results. - This version is not released for older RAIDYNE based GDT RAID controllers like GDT8500RZ, GDT85x6RZ, GDT8x14RZ, GDT8x24RZ, GDT8x22RZ. 1.2 Informational - Detailed documentation of the program can be found under help. Note: not all features may apply to your controller. - Repair of RAID1 and RAID5 arrays can be done by using the auto hotplug feature or by adding a Hot Spare drive to the appropriate array. - After any action taken in ISM it is recommended to manually refresh the displayed information if the information is not updated automatically. 2. Supported Controllers - ICP ICP9085LI/ICP5085BR SAS RAID Controller - ICP ICP9047MA/ICP9087MA SATA RAID Controller - ICP ICP9014RO/ICP9024RO SCSI RAID Controller - ICP ICP5805BL/ICP5045BL/ICP5085BL/ICP5125BR/ICP5165BR Unified Serial Controllers 3. Known Limitations - SNMP notification is not supported. - A scheduled RAID5 verification may not start on Windows systems. - ISM only supports blinking of physical drive LEDs when SAFTE processor is available (i.e. in intelligent hot-plug backplanes). If no SAFTE device is available on the channel the disk is connected to the blink function does not work. -...