Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
To disable email notifications: 1 Open the Email Notification Manager. (See page 99.) 2 In the menu bar, click Actions, then click Disable Email Notifications. Email notifications are disabled. The Email Notifications tab (shown at right) shows the red ‘disabled’ icon. Re-enabling Email Notifications To re-enable email notifications, repeat steps 1 and 2 in Disabling Email Notifications, selecting Enable Notifications during Step 2. Broadcasting Event Alerts to Users You can set the Adaptec Storage Manager Agent to send event alerts about a specific system to all users who are logged into your storage space. You might want to do this if your storage space isn’t managed by a dedicated person, or if that particular system is off-site or not connected to a monitor. Event alerts signal everyone working on the storage space that a system requires technical assistance. When you set Adaptec Storage Manager to broadcast event alerts, all logged-in users receive messages about all types of events. In Windows, these alerts appear as pop-up messages; in all other operating systems, these alerts appear as console messages. When enabled, event alerts occur independent of event notifications (see page 93) and email notifications (see page 99). To enable event alerts: 1 On the tool bar, click the Configure button, select the system you want, then click General Settings. The Adaptec Storage Manager Agent General Settings window opens for that system. (See the figure on page 64.) Chapter 8: Monitoring Your Storage Space . 106 Chapter 8: Monitoring Your Storage Space . 106 Select Broadcast events to logged-in users, then click Save changes. 3 Restart Adaptec Storage Manager to apply the change. Managing Enclosure Status If your storage space includes an enclosure with an enclosure management device, such as a SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) processor, Adaptec Storage Manager also displays temperature, fan, and power module status in the Physical Device view, as shown in the next figure. Fan Status Temperature Status Power Module Status Enclosure Status Icons Enclosure Management Device Icon The enclosure status icons change color to indicate status: Icon Status Examples Enclosure Fans Normal Fans are working properly. Warning A fan has failed. Error Multiple fans have failed. Enclosure Normal Enclosure temperature is normal. Temperature Warning Enclosure temperature is higher than normal. Error Enclosure is overheating. Enclosure Power Normal Power supplies are working normally. Warning One power supply has failed. Error Multiple power supplies have failed. Note: If your enclosure does not have an enclosure management device, the status icons appear but do not indicate status. Chapter 8: Monitoring Your Storage Space . 107 Chapter 8: Monitoring Your Storage Space . 107 Adaptec Storage Manager supports an audible alarm which is triggered on the local system when a Warning- or Error-level event (see page 91) occurs on any system in the ...
Other models in this manual:Other - Adaptec Serial ATA II RAID 1220SA (2.59 mb)
Other - Adaptec RAID 4805SAS (2.59 mb)
Other - Adaptec RAID 4800SAS (2.59 mb)