Stripesize—Optional parameters for specifying a stripe size. STRIPE is specified in kilobytes: 16, 32, and 64 are supported. . Name—Optional parameter for specifying the name of the logical drive to be created. . Init_Priority—Initialization Priority for logical drive to be created. Valid parameters are either HIGH, MED, or LOW. . Init_Method—Initialization method for the logical drive. Valid options include: CLEAR, QUICK. Size indicates the size of the logical drive. MAX is the only size option available. RAID# indicates the RAID level for the logical drive (0, 1, 10 volume). Channel# is the channel number for the device. Drive# is the device number for the drive. Noprompt: No prompt for confirmation. Example HRCONF CREATE 1 LOGICALDRIVE STRIPESIZE 64 MAX 0 1 0 1 1 1 2 hrconf delete Deletes a logical drive. All data stored on the logical drive will be lost. Spanned drives cannot be deleted with this function. Syntax HRCONF DELETE LOGICALDRIVE [noprompt] HRCONF DELETE LOGICALDRIVE ALL [noprompt] Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive to be deleted. LogicalDrive ALL deletes all logical drives Noprompt is an optional parameter that suppresses alert messages. Example HRCONF DELETE 1 LOGICALDRIVE 1 2 3 HRCONF DELETE 1 LOGICALDRIVE ALL Chapter 2: Using the Command Line Utility . 25 hrconf getconfig Lists information about the controllers, logical drives, and physical devices. This information can include (but is not limited to) the following items: . Controller type . Logical drive status, RAID level, and size . Physical device type, device ID, presence of PFA . Physical device state Syntax HRCONF GETCONFIG [AD/LD/PD/AL] Parameters Controller# is the controller number AD/LD/PD/AL options: . AD—Adapter information only . LD—Logical drive information only . PD—Physical device information only . AL—All information (optional) Example HRCONF GETCONFIG 1 AD hrconf getstatus The GETSTATUS function displays the status of any background command that is currently running. Syntax HRCONF GETSTATUS Parameters Controller# is the controller number Example HRCONF GETSTATUS 1 hrconf getversion Returns the version information for all controllers or the optionally specified controller. Syntax HRCONF GETVERSION Parameters Controller# prints the version information for the specified controller Example HRCONF GETVERSION Chapter 2: Using the Command Line Utility . 26 hrconf identify Blinks the LEDs on a device(s) connected to a controller. Syntax HRCONF IDENTIFY LOGICALDRIVE HRCONF IDENTIFY DEVICE Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive to be identified Channel# is the channel number for the device Device# is the device number for the drive. ...
