Votes - 0, Average rating: 0
(
)
)
|
Other manuals for this model:
manual abstract
After a few moments you will see a blue screen. To setup Windows NT now, press Enter and continue with Step 3 below. Boot CD-ROM installation: When the following message appears onscreen, press the F6 key and skip to Step 4 below. Setup is inspecting your computer’s hardware… 3 Press S to skip auto-detection of your AAA-130 Series array adapter. 4 Press S again to specify an additional device. 5 Press Enter to select Others; insert the Adaptec Array1000 Family Manager Set drivers diskette in your floppy drive. 6 The screen displays the adapter drivers supported on the diskette. Select the Adaptec Array1000 Family Adapter and press Enter. 7 If you want to add drivers for other host adapters (other than the AAA-130 Series), do so at this time by pressing S and repeating Step 5 for each additional adapter and inserting the appropriate disk provided by the hardware manufacturer. 8 Press Enter to continue with the Windows NT operating system setup. Follow the onscreen instructions and in the Windows NT documentation to complete the installation. I n st al ling t h e Dr iv er Whe n Wi n d o w s NT is Al re a d y I n st al le d To update or install the cda1000.sys driver if Windows NT is already installed, follow the instructions below for the version of Windows NT that is already installed. Wi n d o ws N T 3 . 51 To install the cda1000.sys driver when Windows NT 3.51 is already installed, follow these steps: 1 Start the Windows NT Setup program. (Its icon is usually found in the Main program group.) There is a brief pause while Windows NT Setup scans your hardware configuration. AAA-130 Series Installation and Hardware Guide Stock Number: 511198-00, Rev. A Page: 4-4 Print Spec Number: 495456-00 Current Date: 3/3/99 ECN Date: 4/29/97 File Location: Q:\Rosemarie\511198-00\CH04.FM Last Modified: March 3, 1999 10:41 am Installing Software on a Windows NT System 2 Select the Options menu and then select Add/Remove SCSI Adapters. The SCSI Adapter Setup program displays a list of all host adapters currently installed. 3 Click Add to add another host adapter type to the list. A list of additional SCSI adapters appears. 4 Expand the list of additional SCSI adapters. Select Other, and press Enter. 5 Insert the Adaptec Array1000 Family Manager Set drivers diskette into drive A. Enter the following path to the installation files and then click OK: a:\winnt 6 The screen displays the adapter drivers supported on the diskette. The Adaptec Array1000 Family Adapter driver is highlighted by default; click OK. The driver is added to the list of SCSI adapters. 7 Select Adaptec Array1000 Family Adapter from the list of SCSI adapters, and click Install. At this point, Windows NT Setup checks if the specified...
Other models in this manual:Other - AAA-131 (482.9 kb)