Login:
Votes - 4, Average rating: 3.5 ( )

User manual Cub Cadet, model Timing Deck Striper/Roller

Manafacture: Cub Cadet
File size: 306.25 kb
File name: 2e114410-1bbf-4cc3-bccf-934d76e8f8ae.pdf
Language of manual:en
Free link for this manual available at the bottom of the page



manual abstract


BOX 361131 CLEVELAND, OHIO 44136-0019 Printed In USA Form No. 769-03885 (February 19, 2008) Assembly & Set-Up 3 Contents of Carton • One 42" Timing Deck Striper/Roller One Operator's Manual Assembly NOTE: On older model decks the holes used to attach the Striper/ Roller to the mowing deck will have to be drilled in order to install the attachment. 1. Remove the attached carriage bolts and flange nuts from the mounting bracket. See Fig. 1-1. Flange Nuts Carriage Bolts Figure 1-1 NOTE: If it is neccessary to drill the holes to attach the Striper/Roller continue on to step 2, if not skip to step 5. 2. 3. 4. On the back center of the deck, lay the bracket on a spot on the deck that will not interfere with any of the belts, blades, etc. under the deck. When you have the bracket positioned properly use a marker to mark the location of the two holes in the bracket onto the deck. Use a 5/i6" drill bit to drill the previously marked holes. NOTE: The deck is made of strong metal so be careful to maintain a strong grip on the drill to ensure a clean hole and avoid damage to the deck. With the carriage bolts and flange nuts removed earlier, attach the Striper/Roller to the deck and tighten securely. See Fig. 1-2. Carriage Bolts Figure 1-2 5 2 Set-Up The roller can be adjusted to two different heights. 1. Remove the cotter pins and clevis pins from each side of the Striper/Roller. See Fig. 1-3. 2. Move the adjustment bracket to the desired height and replace the cotter pin and clevis pin to lock into place. Section 2 — Assembly & Set-Up 3 Illustrated Parts List 2 7 Ref. Part Number Description 1. 710-0451 Carriage Bolt, 5/ia-18 x .750 2. 711-1421 Clevis Pin, 3/s x .750 3. 712-04063 Flange Lock Nut, 5/16-18 4. 714-0149B Cotter Pin 5. 726-04035 Push Nut, % 6. 731-0335 Deck Roller 7. 731-06365 Deck Roller, 2.25 x 5.25 8. 736-0188 Flat Washer, .76 x 1.49 x .06 9. 736-3024 Flat Washer, .469 x .750 x .06 10. 738-0296 Shoulder Screw, .437 x .268 x 5/16-18 11. 747-04915 Roller Rod, .75 x 22.875 12. 783-05916 Anti-Rot Rod Plate 13 783-05918 Roller Bracket 14. 783-05923 Roller Plate Adjustment 4 Notes 5 Notes 6 Notes 7 CubCad&L, To order replacement parts, call a Customer Support Representative at (800) 965-4CUB. Locate your nearest Cub Cadet dealer at (877) 282-8684 or visit to find the nearest Cub Cadet dealer in your area. CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019...


Reviews



Your review
Your name:
Please, enter two numbers from picture:
capcha





Category