Votes - , Average rating:
(
)
)
Manafacture: Parkside
File size: 327.34 kb
File name: 4f86a295-a3bf-4216-bf4c-a2d54497e175.pdf
Language of manual:
The document is loading, please wait
 |
The document is loading, please wait
manual abstract
In doing this, take into account the working conditions and the task in hand. The use of electrical power tools for purposes other than those intended can lead to dangerous situations. A Safety instructions for motor carving devices • Original Accessories / Additional Equipment ■ Use only the accessories and additional equipment referred to in the instructions. The use of tools or other accessories which are not recommended in the instructions may represent a risk of injury. • Operation • Turning the Device On / Off □ Insert the mains plug into a socket. In order to avoid injury, fire and health hazards: ■ Secure the work piece. Use clamping devices / a vice to hold the work piece. It is then held more securely than with your hand. Wear protective goggles! There is a danger of injury from splintering materials flying into your eyes etc. Wear a dust mask! During prolonged working with wood and particularly if materials are processed which produce dusts that are hazardous to the health. Do not soak materials or areas which are to be worked on with solvent-containing liquids. Shaving of the materials may produce harmful / toxic vapours. Material containing asbestos must not be processed with this device. Asbestos is a known carcinogen. Under no circumstances should you prop up your hands next to or in front of the device or the area to be worked on. There is a danger of injury from the very sharp attachment tools. Always route the cable towards the back away from the device. In cases of danger remove the plug from the socket immediately. Switching on: □ Press the ON / OFF switch [T] to the "I" position. Switching off: □ Press the ON / OFF switch [Y] to the "0" position. • Inserting / Replacing Blades A|WARNTnG!| DANGER OF INJURY! Before performing any work on the device, turn the device off and remove the mains plug. A|WARNING!| DANGER OF INJURY! The carving blades have a very sharp edge. During assembly and the final check of the blade you should wear appropriate protective gloves. The selection of the correct carving blade depends on the specific application. The carving blades supplied are suitable for the most common applications (see Figures B - D). □ Release the cap nut [6] with the key [8] in an anticlockwise direction. □ Remove the blade if necessary. Insert another blade into the tool holder [5| as far as it will go. □ Re-tighten the cap nut [6] with the key [8] in a clockwise direction. Ill PARKSIDE GB/IE 9 Operation / Maintenance and Cleaning / Service / Warranty / Disposal Check that the carving blade is securely clamped in place. • Working Instructions □ Always work away from the body. • Maintenance and Cleaning Q Warning! Before performing any cleaning or maintenance work, always remove the mains plug from the socket. □ The device must be clean, dry and free of oil or grease at all times. □ Make sure that the ventilation slots [T] are always clear. □ Clean the tool holder [5] regularly. □ Clean the blades of wood or other materials and residual dirt. □ No liquids must be allowed to enter the interior of the device. □ Use a soft, lint-free cloth to clean the housing. □ Never use petrol, solvents or cleaning agents which attack plastic. • Service ■ g WARNiN ¡Q3 Have your device repaired at the service centre or by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use. ■ 3 Warning! if the plug or lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use. • Warranty The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before deliv- ery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e.g. buttons or batteries. This product is for private use only and is not intended for commercial The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repairs made unter warranty. This applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. GB DES UK LTD Tel.: 0871 5000 700 (£ 0.10 / minute) e-mail: support.uk@kompernass.com IE Kompernass Service Ireland ...