Votes - 4, Average rating: 4.8
(
)
)
|
manual abstract
Use a minimum of 4 chains. Adjust the rigging to prevent damage to the chains. Securing the Platform Make sure the jib and platform are in the stowed position. Place a block under the edge of the platform beneath the platform entry. Secure the platform with a nylon strap placed over the platform mount near the platform rotator (see below). Do not use excessive downward force when securing the boom section. First Edition • Fifth Printing Operator's Manual Observe and Obey: Only qualified riggers should rig and lift the machine. Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight. See serial plate. TRANSPORT & LIFTING INSTRUCTIONS Lifting Instructions Fully lower and retract the boom. Fully lower the jib. Remove all loose items on the machine. Determine the center of gravity of your machine using the table and the picture on this page. Attach the rigging only to the designated lifting points on the machine. There are four lifting points on the chassis. Adjust the rigging to prevent damage to the machine and to keep the machine level. X Axis 35.9 in 91.3 cm Y Axis 33.3 in 84.7 cm PartNo.56011 Genie Z-34/22 Bi-Energy Operator's Manual First Edition • Fifth Printing Decals Decal Inspection Use the pictures on the next page to verify that all decals are legible and in place. Below is a numerical list with quantities and descriptions. Part No. Decal Description Quantity Part No. Decal Description Quantity 27564 Danger - Electrocution Hazard 2 38110 Label - Travel Alarm 1 28157 Label - Dexron 1 38111 Warning - Brake Release 1 28159 Label - Diesel 1 38112 Caution - Collision Hazard 1 28161 Danger - Crushing Hazard 3 40299 Notice - Battery Connection Diagram 2 28162 Warning -Bodily Injury Hazard 1 40300 Danger - Tip-over Hazard 2 28164 Notice - Hazardous Materials 1 40434 Label - Lanyard Anchorage 2 28165 Notice - Foot Switch 1 41971 Label - Tire Pressure 4 28171 Label - No Smoking 2 43658 Power to Charger, 230V 1 28174 Label - Power to Platform, 230V 2 43663 Notice - Function Enable 1 28175 Caution - Compartment Access 1 44980 Power to Charger, 115V 1 28176 Notice - Missing Manuals 1 44981 Label - Airline to Platform 2 28177 Warning - Platform Rotate 2 44986 Notice - Max Manual Force, 90 lbs / 400 N 1 28181 Warning - No Step or Ride 1 52435 Ground Control Panel 1 28235 Label - Power to Platform, 115V 2 52436 Platform Control Panel 1 28236 Warning - Failure To Read . . . 1 52437 Notice - Kubota Diesel Specifications 1 31060 Danger - Tip-over Hazard, Interlock 4 52597 Notice - Operating Instructions 2 31508 Notice - Power to Charger 1 52664 Label - Controller Status Indicator Light 1 31785 Notice - Battery Charger Instructions 2 52968 Cosmetic - Genie Boom 1 31788 Danger - Battery/Charger Safety 2 62924 Cosmetic - Genie Z-34/22 Bi-Energy 2 32700 Danger - Safety Rules 2 62930 Cosmetic - Genie Z-34/22 1 33952 Danger - Tilt-Alarm 1 72092 Ground Control Panel 1 37051 Notice -Max Side Force, 150 lbs / 667 N 1 72093 Platform Control Panel 1 37052 Notice - Maximum Load, 500 lbs / 227 kg 1 72833 Label - Open 2 37053 Arrow - Blue 1 82366 Label - Chevron Rykon 1 37054 Arrow - Yellow 1 37055 Triangle- Blue 2 37056 Triangle - Yellow 2 Genie Z-34/22 Bi-Energy PartNo.56011 First Edition • Fifth Printing Operator's Manual DECALS Platform Drive Chassis - Top Ground Controls Side Engine Side Shading indicates decal is hidden from view, i.e. under covers PartNo.56011 Genie Z-34/22 Bi-Energy Operator's Manual First Edition • Fifth Printing Specifications Height, working maximum 40 ft 8 in 12.4 m Height, platform maximum 34 ft 8 in 10.6 m Height, stowed maximum 6 ft 7 in 2 m Horizontal reach maximum 22 ft 4 in 6.8 m Width 5 ft 8 in 1.7 m Length, stowed 18 ft 6 in 5.6 m Maximum load capacity 500 lb 227 kg Wheelbase 6 ft 2 in 1.9 m Turning radius (outside) 13 ft 1 in 4 m Turning radius (inside) 5 ft 8 in 1.7 m Ground clearance 53/4 in 14.6 cm Turntable rotation (degrees) 355° Turntable tailswing 0 Power source 8 Group-4H, 6V 315AH Batteries with Kubota Z482 engine Drive speeds 3.7 mph 5.9 km/h (maximum) 40 ft/7.5 sec 12.2 m/7.5 sec Booms 0.6 mph 1.0 km/h raised or extended 40 ft/40 sec 12.2 m/40 sec Gradeability (boom stowed) 30% Controls 24V DC proportional Platform dimensions, 56 in x 30 in (length x width) 1.4 m x 76 cm Platform leveling self-leveling Platform rotation 160° AC outlet in platform standard Hydraulic pressure (maximum) 3200 psi (boom functions) 220.7 bar Tires size standard 9-14.5 optional 10-16.5NHS Airborne noise emissions 80 dB Maximum sound level at normal operating workstations (A-weighted) Weight See Serial Plate (Machine weights vary with option configurations) Continuous improvement of our products is a Genie policy. Product specifications are subject to change without notice or obligation. Genie Z-34/22 Bi-Energy PartNo.56011 Genie North America Genie Australia Pty Ltd. Genie China Genie Malaysia Genie Japan Genie Korea Genie Africa Genie Latin America Ph...