Underside: Bottom of bowl undercoated to prevent condensation and deaden sound. Self-rimming: Sink is furnished with appropriate number of clamps to provide a watertight installation. OTHER Drain opening: 3-1/2". Faucet holes: Available with 3 faucet holes only, 4" center to center. Note: Sinks only available in multipacks of 18. Model DPR1812522 SINK DIMENSIONS (INCHES)* Model Number Overall Inside Each Bowl Cutout in Countertop (11/2" Radius Corners) Number of 11/2" Dia. Faucet Holes
Self-rimming. DESIGN FEATURES Bowl Depth: 7" (large bowl), 5-1/8" (disposer bowl). Coved Corners: 3" vertical and 2-1/4" horizontal (large bowl), 1-3/4" horizontal (small bowl). Finish: Exposed surfaces are polished to a satin finish with highshine bowl radius. Underside: Fully undercoated to prevent condensation and deaden sound. OTHER Drain opening: 3-1/2". NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown. These sinks do NOT comply with ASME A112.19.3-2
Width is front to back. D-Prefix sinks are packed one per shipping carton. Sink bowl is fully undercoated. D6-Prefix sinks are nested 6 units per shipping carton. Sink bowls are sound deadened on bottom only. D50-Prefix sinks are nested 50 units per shipping carton. Sink bowls are sound deadened on bottom only. 3 4 |*-4"^<- 4"^t- 4"->| -1-1/4" -C ■ E is Bowl Depth Model D225194 Illustrated E is Bowl Depth Model D233194 Illustrated D C A ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIME
Self-rimming. DESIGN FEATURES Bowl Depth: 6-1/4" (D22519), 6-7/16" (D23319). Coved Corners: Interior vertical and horizontal corners are rounded to a minimum of 2-1/4" radii. Finish: Exposed surfaces are polished to a satin finish. Underside: As described below. OTHER Drain Opening: 3-1/2". NOTE: Unless otherwise specified, sink is furnished with 4 faucet holes as shown. These sinks comply with ASME A112.19.3-2000. These sinks are listed by the International Association of Plumbing and
Width is front to back. |^4^4^4^ |*.4'^*4'^*4V| Model DDEMR233224 Illustrated Model DDEMR23322R4 Illustrated HOLE DRILLING CONFIGURATIONS tü |*.4'^*-4'^+4V| 4 4 ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user When making a compa
Width is front to back. |*4"^«4"«-| 22" 15-3/4" k4"- -4" 3" R y 14" 33" -14"- -2-1/4" R Model DPR1812522 Illustrated -2-1/4" R -15-1/4"- Model DPR1823322 Illustrated 7 7" ALL DIMENSIONS IN INCHES, TO CONVERT TO MILLIMETERS MULTIPLY BY 25.4. In keeping with our policy of continuing product improvement, Elkay reserves the right to change product specifications without notice. This specification describes an Elkay product with design, quality and functional benefits to the user.