VEUILLEZ LIRE ET CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION. Repels mice, cockroaches, spiders, and other pests.† About Ultrasound Ultrasonic waves are nearly silent to humans and most animals. Most pests hear sounds in the ultrasonic range. Household pests are repelled because they cannot adapt to the constantly changing array of ultrasonic waves emitted by the unit. The wave signals disrupt the pests’ nervous system, greatly affecting their feeding and communication habits, thereby forcin

POR FAVOR LEA ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. VEUILLEZ LIRE ET CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION. Repels mice, rats, cockroaches, spiders, scorpions and other pests.† About Ultrasound Ultrasonic waves are nearly silent to humans and most animals. Most pests hear sounds in the ultrasonic range. Household pests are repelled because they cannot adapt to the constantly changing array of ultrasonic waves emitted by the unit. The wave signals disrupt the pests’ nervous system

Note: If the height of your overhang molding is too tall to be accommodated by the number of spacers provided, you may call, toll-free, at 1-800-231-9786 to order additional spacers at no charge. Note: For spacer installation, you may require assistance in mounting in order to hold spacers in place while securing the appliance at the same time. If assistance is not available, use a small clamp to hold the spacers in place while you position the appliance. 15. Once spacers are set, hold appliance

• DO consider your normal work patterns in the kitchen when choosing location. • DO NOT mount over any heating or cooking appliance such as your range or oven. • DO NOT mount over or near a sink. • DO NOT mount under, in front of or behind any under-cabinet light fixtures. Note: If you are mounting multiple †SpaceMaker™ appliances, they should not be mounted flush to one another. Allow at least 4” of space between appliances for adequate cooling. Note: If you are connecting this appliance to the

4. After measuring the overhang molding thickness as shown in Illustration G, look at the dashed lines on the mounting template; each line has a measurement next to it that indicates the thickness of the overhang molding used with that line. For example, if your cabinet has an overhang molding thickness of .”, you will use the .” dashed line on the template. 5. Fold the template along the dashed line that matches the thickness of your overhang molding. 6. Place the folded template against the ba

• Open frozen juices or foods in cardboard cans right from the freezer, while they are frozen. • Aluminum lids will not stick to the magnet. M USING THE KNIFE SHARPENER 1. For best results, sharpen the entire blade length in one continuous stroke. 2. Insert blade to be sharpened with the end of the blade closest to the handle on the knife into the sharpening slot. 3. Carefully press down on the blade and pull it toward you through the slot in one continuous stroke (N). Important: Do not saw knif

It is NOT dishwasher-safe. Reverse the procedure to replace the Blade Assembly. 3. Before replacing the Blade Assembly, wipe the Can Opener body, and area around the drive wheel with a slightly damp cloth or sponge. To remove stubborn spots, wipe surfaces with a nylon or mesh pad and sudsy water. Follow with a clean, damp cloth. Do not use abrasive cleaners on any part of the Can Opener as they can damage the finish. 1. El ensamble de la cuchilla ha sido empacado en carton por separado. Instale

5. You may “stuff” excess cord into the back of the unit and feed the cord through the notch for convenient storage. CAN OPENING TIPS • This Can Opener should not be used to open cans designed to be opened by another method, such as a pull tab, peel-off foil seal, or rolling key. This Can Opener will not open rimless cans or cans with angled corners. • If there is a dent in the rim of a can, open the other end or start the cutting action just beyond the dent. Cans with heavy seams, uneven rims o

*Spam®, **Crisco®, sardines, etc.). This Can Opener will not open rimless cans. • If there is a bump or dent in the rim of the can, open the other end or start the cutting action just beyond the dent. Cans with heavy seams, uneven rims or odd shapes may cause the Can Opener to stall. If this occurs, turn the can slightly by hand to aid the cutting action. • Frozen juices or foods in cardboard cans should be opened as soon as they are removed from the freezer. Aluminum lids will not stick to the

¦ The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury. ¦ Do not use outdoors. ¦ Do not let cord hang over edge of table or counter or touch hot surfaces. ¦ Do not open pressurized (aerosol type) cans. ¦ Do not open cans of flammable liquids such as lighter fluids. ¦ Do not operate this appliance in the presence of explosive and/or flammable fumes. ¦ This appliance is intended for household use only and not for commercial or indus