Votes - 1, Average rating: 5
(
)
)
|
manual abstract
See also page 41. If the source is not ready, you cannot select the source. Key icon appears as negative pattern. Either “CD-CH” or “EXT- IN” appears depending on the “Ext Input” setting (see page 29). Displayed only when playing an audio CD or when the source is “TUNER,” “LINE- IN” or “EXT-IN.” ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery Main elements and features (CR2025) • When operating, aim the remote controller directly at the remote sensor on the receiver. Make sure there is no obstacle in between. Warning: • Store the battery in a place where children cannot reach to avoid risk of accident. • To prevent the battery from over-heating, cracking, or starting a fire: – Do not recharge, short, disassemble, or heat the battery or dispose of it in a fire. – Do not leave the battery with other metallic materials. – Do not poke the battery with tweezers or similar tools. – Wrap the battery with tape and insulate when throwing away or saving it. Caution: The receiver is equipped with the steering wheel remote control function. • See the Installation/Connection Manual (separate volume) for connection. 1 (standby/on/attenuator) button • Turns on and off the power and also attenuates the sound. 2 SOURCE button • Selects the source. 3 5 (up) / . (down) buttons • Changes the preset stations. • Changes the categories for SIRIUS®. • Changes the MP3/WMA folders. 4 VOL (volume) + / – buttons • Adjusts the volume level. 5 Number buttons • Selects the preset station if pressed, or store a station if pressed and held. • Selects the preset channels while listening to SIRIUS radio, or store a channel if pressed and held. • Selects the tracks while playing an audio CDs or CD Texts. • Selects the folders while playing MP3/WMA discs or an SD card. • Selects the discs while operating the CD changer. 6 ANGLE button • Adjusts the control panel angle. 7 BAND button • Selects the band for FM/AM and SIRIUS. 8 4 / . buttons • Searches for stations if pressed, or skips frequencies after pressed and held. • Changes the tracks of the disc or of the SD card if pressed. • Fast-forwards or reverses the track if pressed and held. • While listening to the SIRIUS radio: – Changes the channels if pressed briefly. – Changes the channels rapidly if pressed and held. Getting started ENGLISHBasic operations To drop the volume in a moment (ATT) ~ To restore the sound, press it again. Y Select the source. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. Voice support system (VSS) You can select either “Beep” or “Voice” for the VSS. If “Voice” is selected, the language used for VSS changes to the selected language— English, Spanish, or French. To change the VSS setting, see page 29. You can also select the source by.... ! . Adjust the sound as you want. (See pages 20 and 21.) ENGLISH 3 Adjust the hour. Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: All Time]—see page 26. 4 Select “Clock Min” (minute), then adjust the minute. 1 2 Select “Off.” 3 Exit from the setting. To activate the display demonstration In step 2 above, select “All Time” or “Interval.” For more details, see page 26. Setting the clock 1 2 5 Select “24H/12H,” then select “24Hours” or “12Hours.” 6 Exit from the setting. To check the current clock time when the power is turned off Radio operations ENGLISHListening to the radio ~ Select “TUNER.” Y Select the band (FM/AM). ! Start searching for a station. To tune in to a station manually In step ! on the left... 1 2 Select the desired station frequencies. When an FM stereo broadcast is hard to receive 1 2 Select “MONO On.” Reception improves, but stereo effect will When a station is received, searching be lost. stops. To stop searching, press the same icon 3 Exit from the setting. again. To restore the stereo effect, repeat the same procedure and select “MONO Off” in step 2. ENGLISH Storing stations in memory You can preset six stations for each band. FM station automatic presetting — SSM (Strong-station Sequential Memory) 1 Select the FM band (FM1 – FM3) you want to store into. 2 3 Local FM stations with the strongest signals are searched and stored automatically in the FM band. Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 • Holding or can display the Preset Station List (see step 5 below). 3 Appears only for FM. 4 5 ENGLISHPreset Station List The lists show either the station frequency or assigned name (the first 8 characters). Listening to a preset station 1 2 Select a preset station (1 – 6) you want. • Holding or can display the Preset Station List (see below). To select a preset station using the Preset Appears only for FM. Preset Station List The lists show either the station frequency or assigned name (t...
Other models in this manual:Other Home Accessories - KD-LHX550 (1.71 mb)