Votes - 5, Average rating: 4
(
)
)
|
manual abstract
No. 236 Assembly Instructions § Parts List DUMP CART No. LM-16002-36 Assembly 1. Mount the two wheel and tire assemblies on the axle and secure with two 3/4" washers and two 3/16 x 1-1/2" cotter pins. 2. Mount the frame assembly to the axle assembly and secure with two 5/16 x 4-5/8 L-shaped pins and two quick pins. Be sure the axle curve is away from the ground. 3. Bolt the tongue to the frame assembly using two 3/8-16 x 2-1/4" caps crews, lockwashers, and hex nuts. Be sure that the front end of the tongue is lower than the end that is bolted to the frame. 4. Insert the box pivot assembly into the rear of the frame assembly and secure with two 1/2 x 1-1/2" pins and two quick pins. 5. Place the dump body on its tailgate to attach the pivot box assembly. Place the two 3/8" long bushings, one in each arm of the pivot box assembly. Insert a 3/8-16 x 1" capscrew with a 3/8" flatwasher through the trailer body sides and through each bushing and secure with 3/8” lock-washer and hex nut on each side. (Figure 2.) Part No. 24744-4 Supersedes 24744 6. Place the box catch clevis over the tongue and insert a 3/8-16 x 2-3/4" caps crew through the clevis and tongue from the side opposite the box catch handle. Place the box catch spring over the end of thecapscrew and secure with a 3/8" washer and hex, locknut. The box catch clevis should move freely, do not overtighten. The larger hook of the box catch spring is then placed over the tongue and the smaller one against the box catch handle to hold the catch toward the rear of the dump cart. 7. Place the box guide plate inside the dump box with the grooved end extending through the slot in the box floor. Position the box catch plate on the outside with the upturned end toward the box bottom and secure with two 3/8-16 x 1" capscrew, lockwashers and hex nuts. Lubrication The dump cart has two standard sized grease fittings, one on each wheel, which require occasional lubrication with general purpose automotive grease. Before lubricating, wipe each grease fitting to prevent grit and dirt from being carried into the bearings with the new grease. Lubricate all pivot points arid the box catch clevis with SAE-10 oil frequently. Tires The tires of the dump cart are inflated for shipping with pressure in excess of the normal amount. For normal lawn use deflate the tires until a pressure of 6-8 lbs. P. S. I. is reached. When carrying heavy loads, or when used with the vacuum collector, it will be necessary to increase this pressure, to 14-16 lbs. P. S. I. to prevent damage to tires or wheels. Operation The dump cart is designed to easily haul 1, 000 lbs. of any type of material and has a 7 cubic ft. capacity struck and 10 cubic ft. heaped. The box can easily be unlatched without detaching from the tractor and can be turned completely upside down by tilting up and back to empty all contents without shoveling. The tailgate is detachable. 2 DUMP CART No. Description Part No. Qty. No. Description Part No. Qty 1 GATE-end LM-01020-03 1 17 WASHER-flat, 3/4 LM-09184-32 2 2 FILM-Homelite LM-01744-49 1 18 PIN-cotter, 3/16 x 1-1/2 LM-09184-59 2 3 SCREW-cap, 3/8-16 x 1 LM-09077-31 4 19 PEN LM-80112-04 2 4 BUSHING LM-81510-76 2 20 FRAME ASSEMBLY LM-01020-35 1 5 NUT-hex, 3/8-16 LM-09169-50 6 21 TONGUE ASSEMBLY LM-01020-37 1 6 WASHER-lock LM-09169-65 6 22 PIN-inner LM-01052-49 1 7 WASHER-flat, 3/8 LM-09173-78 3 23 SCREW-cap, 3/8-16 x 2-1/4 LM-09193-62 8 PIVOT ASSEMBLY-box LM-01020-24 1 24 SPRING-tor sion LM-01020-75 1 9 PIN-pivot LM-01020-04 2 25 NUT-hex lock, 3/8-16 LM-09234-28 1 10 PIN-quick LM-81610-45 5 26 PLATE-box catch LM-01020-40 1 11 AXLE ASSEMBLY LM-01020-27 1 27 CLEVIS ASSEMBLY LM-01020-51 12 WHEEL & TIRE ASSEMBLY LM-01703-20 2 28 SCREW-cap, 3/8-16 x 2-3/4 LM-09219-73 1 Includes: 29 BODY-trailer LM-01020-02 1 13 BEARING LM-01703-18 2 30 PLATE-box guide LM-01020-05 1 14 TUBE LM-01530-38 2 15 TIRE LM-01020-52 2 Accessory 16 WHEEL LM-01703-19 2 PAINT-blue, 14 oz. spray can LM-16076-89 1 ALWAYS FURNISH MODEL AND SERIAL NUMBER WHEN ORDERING PARTS. 3 PRINTED IN U. HOMELITF DIVISION S. A. PORT CHESTER, NEW YORK, U.S.A. 10573 E2375FZ...