|
manual abstract
Be sure to retain your original sales receipt, and refer to the warranty section of this guide for full details about your coverage. OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY LAW, AND DEI NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. DEI HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. Unit must be returned to DEI, postage pre-paid, with bill of sale or other dated proof of purchase bearing the following information: consumer's name, telephone number, and address, authorized dealer's name and address, and product description. Note: This warranty does not cover labor costs for the removal and reinstallation of the unit. IN ORDER FOR THIS WARRANTY TO BE VALID, YOUR UNIT MUST BE SHIPPED WITH PROOF OF INSTALLATION BY AN AUTHORIZED DEI DEALER. ALL UNITS RECEIVED BY DEI FOR WARRANTY REPAIR WITHOUT PROOF OF DEI DEALER INSTALLATION WILL BE COVERED BY THE LIMITED 1 YEAR PARTS AND LABOR WARRANTY. Note: This warranty does not cover labor costs for the removal and reinstallation of the unit. BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND Directed SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. To prevent fire or shock hazard, do not expose the LED lightbar to rain or moisture. Do not attempt to disassemble the LED lightbar or damage will occur. FUNCTION The LED lightbar is designed to create accent lighting for automotive interiors. Applications include amplifiers, speaker boxes, footwells, doors, and much more. MODEL CROSS REFERENCE CHART Model LED Lightbar Model LED Lightbar Model LED Lightbar A502 DIRW9BL A1004 DIRW15BL D1200 DIRW9BL A802 DIRW9BL D600 DIRW9BL D2400 DIRW15BL A404 DIRW9BL D800 DIRW9BL D2205 DIRW15BL © 2005 Directed Electronics, Inc. all rights reserved N45040.45 06-05 LED LIGHTBAR INSTALLATION 2005 model Directed Audio Amplifiers have been designed with a custom heat sink that accomodates two (optional - not supplied) LED lightbars. Use the following procedure for installation in Directed Audio Amplifiers. 1. Remove the LED tubes, find the connection points to the LED tubes and the plug which connects to the amplifier. 2. Slide each LED tube assembly into your Directed Audio Amplifier heat sink. Ensure the wire harness is on the same end of the amplifier where the plug connects to the amplifier (signal input end). Orient the LED tube assembly so that the LEDs are facing out for optium lighting effect. 3. Connect the 4-in plug to the LED/FAN input port of the Directed Audio Amplifier. N NNO OOT TTE EE 1 11: :: The other RED and BLACK wire can be connected to an optional fan. The fan must not draw more than 200mA. If the optional fan is not being used, the ends of these wires mu...
Other models in this manual:Other Home Accessories - DIRW15BL (48.02 kb)