RIGGING It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs. • When selecting installation location, take into consideration lamp replacement access and routine maintenance. • Safety cables should always be used. • Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation. Often, the setup for Master-Slave and Standalone operation requires that the first fixture in the chain be initialized for this purpose via either settings in the control panel or DIP- switches. Secondarily, the fixtures that follow may also require a slave setting. Please consult the “Operating Instructions” section in this manual for complete instructions for this type of setup and configuration. Hanging Clamp Note! Clamp is sold separately. Text Box: Hanging Clamp 4. OPERATING INSTRUCTIONS Navigating the Control Panel Access control panel functions using the four panel buttons located directly underneath the LCD Display. Button Function Used to access the menu or to return to a previous menu option Scrolls through menu options in ascending order Scrolls through menu options in descending order Used to select and store the current menu or option within a menu The Control Panel LED Display shows the menu items you select from the menu map on page 13. When a menu function is selected, the display will show immediately the first available option for the selected menu function. To select a menu item, press . Press the button once to activate the control panel. Pressing the button again will scroll through the different top-level menu options available. Use the and buttons to navigate the menu options. Press the button to access the menu function currently displayed or to enable a menu option. To return to the previous option or menu without changing the value, press the button. Menu Map MODE ENTER UP DOWN Menu Values MENU VALUE FUNCTION A 001 002 003 004 005 006 007 008 009 010 011 012 013 014 015 016 017 018 019 020 021 022 023 024 Red (static) Green (static) Blue (static) Yellow (static) Magenta (static) Cyan (static) White (static) Auto/Sound Mode 1 Auto/Sound Mode 2 Auto/Sound Mode 3 Auto/Sound Mode 4 Auto/Sound Mode 5 Auto/Sound Mode 6 Auto/Sound Mode 7 Auto/Sound Mode 8 Auto/Sound Mode 9 Auto/Sound Mode 10 Auto/Sound Mode 11 Auto/Sound Mode 12 Auto/Sound Mode 13 Auto/Sound Mode 14 Auto/Sound Mode 15 Auto Mode 1 Auto/Sound Mode 16 F 000 .. 099 100 Strobe (Static Colors Only) Solid On Strobe (Slow > Fast) Sound-active Strobing P 000 001 .. 099 100 Auto Run Delay (Auto/Sound Modes Only) Never Auto run Time Delay (Long > Short) No Delay Menu Functions MENU OPTION DESCRIPTION Adobe Systems Auto Mode – Stand-alone: Sets the fixture to Master status for Master-Slave operation and the built in programs will be triggered by the sound. No data link is required; all fixtures can be set to this mode for Stand-alone operation. Adobe Systems DMX: The fixture will be controlled by a DMX signal coming from a DMX controller. The starting address must be selected, and can be set using the up and down buttons. Adobe Systems Strobe Mode: Sets the fixture to strobe the selected color. This setting is only available when the unit is set to display a static color in standalone mode (A001-A007). Adobe Systems Auto Run Delay: If the unit does not trigger with sound within a certain time period, it can automatically enter auto mode. This setting controls the time delay before entering auto mode. Note that auto mode is cancelled as soon as the unit triggers with sound. Operation Stand-Alone Mode (Sound-Active, Auto Mode): This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto Mode. 1) Press the button. 2) Use the and buttons to locate the desired program (A001 – A024). Some programs are static, and some can trigger to sound. See the Menu Values section on the previous page for a complete list of programs. 3) Each program has settings which can be configured by pressing while the program is displayed. Press while the program is displayed. Scroll through to the desired setting and press . See the Menu Values section on the previous page for a complete list of settings. 3) Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity; turning the knob clockwise increases the sensitivity. Master/Slave Mode (Master Sound, Master Auto): This mode will allow you to link up to 32 units together without a controller. 1) Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the unit...
