Votes - 3, Average rating: 3.7
(
)
)
|
manual abstract
¦ Do not let the cord of the charging base hang over the edge of table or counter, or touch hot surfaces. Unit should be placed away from sink, hot surfaces, heating or cooking appliances. ¦ Do not use an extension cord. Plug charger directly into an electrical outlet. ¦ Do not attempt to use this charger with any other product. Likewise, do not attempt to charge the cordless can opener with any other charger. ¦ Do not open pressurized (aerosol-type) cans. ¦ Do not open cans of flammable liquids such as lighter fluids. ¦ Make sure the appliance is off and motor has stopped completely before putting on or taking off attachments, and before cleaning. ¦ Avoid contacting moving parts. Keep hands, hair, jewelry, clothing, as well as spatulas and other utensils away from moving parts during operation to prevent injury, and/or damage to the Can Opener. ¦ The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock or injury. ¦ This appliance is intended for household use only and not for commercial or industrial use. ¦ Unplug the charger from the outlet before attempting any routine cleaning of the charging base. 2 ¦ Do not operate if the electrical cord, plug, or charger is damaged or malfunctions in any manner. Return the can opener to the nearest Black & Decker authorized service facility for examination, repair, or adjustment. ¦ This product contains nickel-cadmium batteries which must be recycled or disposed of properly at the end of the life of the can opener (see “Battery Removal and Disposal”). Do not incinerate or compost batteries as they will explode at high temperatures. ¦ Leaks from battery cells can occur under extreme conditions. If the liquid, which is a 20-35% solution of potassium hydroxide, gets on the skin (1) wash quickly with soap and water or (2) neutralize with a mild acid such as lemon juice or vinegar. If the liquid gets into the eyes, flush them immediately with clean water for a minimum of 10 minutes. Seek medical attention. SAVE THESE INSTRUCTIONS Locating Tab Locating Tab Cutting Assembly/Pierce Lever Magnet Can Opener Unit Charging Base How To Use NOTE: The rubberized grip is free of natural rubber and latex. It is safe for use by individuals allergic or sensitive to these materials. CHARGING PROCEDURES IMPORTANT: Before first use, place the unit in the Charging Base so that the Tab on the handle fits into the notch on the base ( ). Push all the way down to assure proper charging. Leave it plugged in for 24 hours for best operating capability. 3 1. Plug the Charging Base into a standard outlet. While charging, it is normal for the Charging Base to feel warm. 2. Stand the Can Opener in the Charging Base as shown (A). The unit is designed so the batteries may be on continuous charge. Storing it in the Base keeps it always ready for use. 3. If after repeated use the running time seems shorter and the Can Opener has less power, remove it from the Charging Base, hold the Lever and let the unit run until it stops. Then recharge the unit for 24 hours. 4. If the Can Opener doesn’t function, be sure the Charging Base is plugged in and the outlet is not controlled by a wall switch. Also check for a blown house fuse. OPENING CANS 1. Lift the Pierce Lever up, place the can under the Locating Tabs (B), and press the Lever down so that the blade is inside the rim of the can and pierces the lid. Adjust the magnet onto the lid. 2. For small cans (such as tuna), hold the Can Opener in your hand and let the can rotate under the Cutter until the lid is cut. A B Hold the can as you release the lever. 3. For standard size or larger cans, the unit will pierce the lid, “walk around,” and automatically stop once the can is opened. Lift the Pierce Lever to remove the can. NOTE: This Can Opener may be used by either right or left-handed consumers. Hold the handle in your right hand and position cans with your left. Care and Cleaning 1. Unplug the Charging Base and remove the Can Opener before cleaning any part. 2. To remove the Cutting Assembly for easy cleaning, push the Pierce Lever up as far as it will go and pull it out away from the unit (C). It 4 5 can be washed in a dishwasher or by hand in hot, soapy water; rinse and dry thoroughly. Do not immerse the Can Opener in water or other liquids. 3. To replace the Cutting Assembly (see C) line up and insert the “key” spindle into the “key” notch in the Can Opener and press the Pierce Lever down. 4. Wipe the Base and Cord with a damp cloth or sponge or a soapy, mild, non-abrasive cleaner and follow with a clean, dry cloth. CAN OPENING TIPS 1. Start the cutting action just beyond any bump or dent in a can. Cans with heavy seams, odd shapes, or uneven rims may stall the Can Opener. If this happens, turn the can slightly with one hand while holding the Can Opener with the other. 2. Frozen juices should be opened as soon as they are removed from the freezer. 3. Your Can Opener will not open rimless cans, such as evapo...