Votes - 4, Average rating: 3.3 ( )

Manafacture: Dimplex File size: 170.43 kb File name: Language of manual:

Children should be supervised to ensure that they do not play with the appliance. Precautions should be taken to ensure that prolonged contact with the towel rail cannot occur. Particular care should be taken in confined areas where accidental prolonged contact with the rail could be more likely to occur. This appliance should only be used to dry fabrics washed in water using commonly available detergents. IMPORTANT - If the towel rail is to be installed in a place used by the public, a warning notice should be placed adjacent to the rail advising that the surface can be hot. WARNING - In order to avoid a hazard for very young children, this appliance should be installed so that the lowest heated rail is at least 600mm above the floor. General The DTR towel rail is designed to provide an all year round service for airing towels and articles of clothing. It is not intended to provide a sole heating service, but the larger model will take the chill off an average size bathroom, lavatory or en suite. Your rail will be in one of two sizes and will have either silver chromium plated or white stove-enamel finish. No routine maintenance is necessary apart from occasional cleaning. Both models are splashproof to IPX4 standard. Electrical The electrical installation of this towel rail must be carried out by a competent electrician in accordance with the current I.E.E Regulations for Electrical Equipment. The towel rail is suitable for use on an A.C.~ electrical supply. Before installation check that the supply voltage corresponds with that marked on the rail. IMPORTANT - The wires in the mains lead are coloured in accordance with the following code: BLUE - NEUTRAL BROWN - LIVE This appliance must only be used on A.C. mains supply of 230/240 Volts~. Installation If fitted in a room containing a bath or shower, to comply with the current I.E.E. Regulations, a cable outlet will be necessary with the supply to the heater controlled by a double-pole pull-cord switch having a contact separation of 3mm in each pole. The body of the switch should be situated as to be normally inaccessible to a person using a bath or shower. Should Equipotential Earth Bonding be required the earthing conductor in the supply cord is deemed to provide the supplementary bonding connection (see Regulation 547-03-0, ’16th’ Edition I.E.E. Wiring Regulations. IMPORTANT - Protect the electrical connection whilst handling the towel rail. The towel rail must be permanently fixed to the wall using the wall brackets supplied. The rail must be mounted vertically as shown observing the minimum clearances stated. WARNING - The towel rail is heavy. Care must be taken when lifting and fitting the towel rail. Wall mounting The wall mounting accessory pack contains: (a) 4 mounting brackets (b) 1 allen key (c) 4 wall mounting screws, washers and wall plugs (d) 4 hex. stud screws IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Dimensions (millimetres) Installa...

Download now

Please, enter two numbers from picture: